Oki 1.2 manual Gatekeeper settings, To select Unicast GRQ or Multicast GRQ when

Page 42

Gatekeeper settings

Item	Description	Default
VoIP	Specifies the VoIP telephone number of the VoIP-TA.	2000
telephone	Use the default number in the gatekeeper when using the
No.	gatekeeper.
Validate	Activate to use the gatekeeper.	OFF
gatekeeper
Gatekeeper	Specifies the UDT port number, and must be set when using	1719
port No.	a gatekeeper.
Gatekeeper	Specifies the IP address for the gatekeeper. This address	255.255.255.255
IP address	must be entered when using the gatekeeper without using
	the gatekeeper detection function.
Detect	To select Unicast GRQ or Multicast GRQ when the	Multicast
gatekeeper	gatekeeper is detected.
Detail	To make detailed settings for the gatekeeper. Click on this
setting	button to display the setup screen (see page 35).

Default values, set at the time of product shipping, are displayed when the Restore default button is clicked.

34Setup

Image 42

Contents

Installation Guide VersionSafety Warning Page Contents Setup VoIP-TA setting Window Important Equipment InformationImportant Safety Instructions Important Safety Instructions Introduction Welcome to the world of Oki Internet telephony…Features OutlineVoIP-TA Front Panel LEDsConnectors Back PanelMode When using both IP and PstnWhen using IP network only StatusAnalogue telephone or G3 facsimile equipment II InstallationConnections Analogue PstnPower source Personal computer PCDuring installation During useIII Placing Calls Via an IP NetworkGeneral Operation Services Third party incoming call during another callEnd-to-end service using Dtmf signaling Call transfer during a telephone callPlacing Calls Absent service How to register the absent serviceHow to cancel the absent service Line selection Details of ServicesUsing both a Pstn line and the IP network Third party incoming call during another callFor Pstn line not receiving services using hookflash hooking Power failure switching Identification of incoming callUsing the IP network only Setting IP AddressTranslating IP Address for VoIP Installing the Maintenance Console Software IV SetupMaintenance Console Software Requirements Maintenance Console Software CompatibilityMode Function Functions of the Maintenance Console SoftwareData Setup Procedure Password, see Chapter V,Activating and Deactivating the Software’s Functions New connection window will appear Changing Modes and Setup Conditions Changing to the Setup modeChanging setup conditions Saving all setup conditions in a file Reading information From the file Select outgoing destination below Basic settings for Pstn lineDescriptions Default For Pstn lineSelect Use Pstn line, Use VoIP line or Unavailable to dial Description DefaultSelect outgoing destination Neglect first1st Outgoing Neglect Digit Destination 1st digit Dailing IP address NumberDialed, excluding the first digit and 567 connects the call Number VoIP-TA operation DialedDialed, excluding the first digit and 901 connects the call Dialed, excluding the first digit and 789 connects the callDetailed settings for Pstn line Network settings UDP port No Specifies the UDP port number for communication Network Address Translation NAT Global address spaceStatic IP Masquerade with port number translations Gatekeeper settings To select Unicast GRQ or Multicast GRQ whenDetailed Gatekeeper settings BRQ DRQ GRQSorting the list using each row as a key Sort with key Address tableAddress table display editing Setup Details DescriptionButton see pages 42 Voice settings RTP/RTCPVoice codec setting and bandwidth used Setting ms ByteVoice codec FAX setting TCP/UDPSlic setting Maintenance Functions of the Maintenance Console SoftwareVerifying the Software Version Information Checking the Operation Status of the VoIP-TA Display Displayed contents Description Explanation of the displayed informationUpdating Unit Programs Changing the password Remote mode VI TroubleshootingSymptom Items to check Local modeVII Specifications UsagePort number Important Equipment Information Warranty and Service Warranty PeriodFollowing the warranty period Oki Service Offices London Office