Oki 1.2 manual Changing setup conditions

Page 30

Changing setup conditions

•Once the setup mode has been changed, click the Data setting button on the Main window.

•The setup (VoIP-TA

setting) window will appear.

Click the tabs on the window to display the desired current status. Change the items displayed on the window, as necessary.

A detailed explanation of each window is provided in Setup (VoIP-TA setting) window (see page 24).

•Once the necessary changes have been made on the setup window, they can be set by clicking the OK button.

*The changed items can be saved on the PC as a file by clicking on the Save button (see page 23).

*The file containing the saved changes of the setup can be retrieved by clicking on the Read from file button (see page 23).

•To set the VoIP-TA to the

operation mode, click on Mode (M) on the menu bar of the main window and select Change mode in the pull-down menu. The Mode change window will be displayed. Select Operation mode on the pull- down menu and click the OK button. After the mode change the new setting will become effective.

22Setup

Page 29 Page 31
Image 30
Page 29 Page 31
Contents
Installation Guide VersionSafety Warning Page Contents Setup VoIP-TA setting Window Important Equipment InformationImportant Safety Instructions Important Safety Instructions Introduction Welcome to the world of Oki Internet telephony…Features OutlineVoIP-TA Front Panel LEDsConnectors Back PanelMode When using both IP and PstnWhen using IP network only StatusAnalogue telephone or G3 facsimile equipment II InstallationConnections Analogue PstnPower source Personal computer PCDuring installation During useIII Placing Calls Via an IP NetworkGeneral Operation Services Third party incoming call during another callEnd-to-end service using Dtmf signaling Call transfer during a telephone callPlacing Calls Absent service How to register the absent serviceHow to cancel the absent service Line selection Details of ServicesUsing both a Pstn line and the IP network Third party incoming call during another callFor Pstn line not receiving services using hookflash hooking Power failure switching Identification of incoming callUsing the IP network only Setting IP AddressTranslating IP Address for VoIP Installing the Maintenance Console Software IV SetupMaintenance Console Software Requirements Maintenance Console Software CompatibilityMode Function Functions of the Maintenance Console SoftwareData Setup Procedure Password, see Chapter V,Activating and Deactivating the Software’s Functions New connection window will appear Changing Modes and Setup Conditions Changing to the Setup modeChanging setup conditions Saving all setup conditions in a file Reading information From the file Select outgoing destination below Basic settings for Pstn lineDescriptions Default For Pstn lineSelect Use Pstn line, Use VoIP line or Unavailable to dial Description DefaultSelect outgoing destination Neglect first1st Outgoing Neglect Digit Destination 1st digit Dailing IP address NumberDialed, excluding the first digit and 567 connects the call Number VoIP-TA operation DialedDialed, excluding the first digit and 901 connects the call Dialed, excluding the first digit and 789 connects the callDetailed settings for Pstn line Network settings UDP port No Specifies the UDP port number for communication Network Address Translation NAT Global address spaceStatic IP Masquerade with port number translations Gatekeeper settings To select Unicast GRQ or Multicast GRQ whenDetailed Gatekeeper settings BRQ DRQ GRQSorting the list using each row as a key Sort with key Address tableAddress table display editing Setup Details DescriptionButton see pages 42 Voice settings RTP/RTCPVoice codec setting and bandwidth used Setting ms ByteVoice codec FAX setting TCP/UDPSlic setting Maintenance Functions of the Maintenance Console SoftwareVerifying the Software Version Information Checking the Operation Status of the VoIP-TA Display Displayed contents Description Explanation of the displayed informationUpdating Unit Programs Changing the password Remote mode VI TroubleshootingSymptom Items to check Local modeVII Specifications UsagePort number Important Equipment Information Warranty and Service Warranty PeriodFollowing the warranty period Oki Service Offices London Office