Oki 1.2 manual Explanation of the displayed information, Display Displayed contents Description

Page 53

Explanation of the displayed information

Display	Displayed contents	Description
item
Mode	Operation mode	Operation mode
	Setup mode	Setup mode
	Installation mode	Installation mode
VoIP line	Line locked	The VoIP line is unusable.
	Idle	The VoIP line is ready. No communication.
	Outgoing	Originating via the VoIP line.
	Incoming	Terminating from the VoIP line.
	Telephone call in progress.	A call via the VoIP line in progress.
PSTN line	Line power is not detected.	The PSTN line cannot be detected.
	Idle	The PSTN line is ready. No communication.
	Outgoing	Originating via the PSTN line.
	Incoming	Terminating from the PSTN line.
	Telephone call in progress.	A call via the PSTN line in progress.
	Holding	A call via the PSTN line is currently on hold.
LAN	Usable	The LAN is available.
	Unusable	The LAN is not available.
VoIP	VoIP telephone number	Current telephone number of the VoIP-TA.
telephone		When a VoIP telephone number is obtained
number		from a gatekeeper, the number is displayed on
		the screen. See gatekeeper settings page 34.
Call	VoIP telephone number	VoIP telephone number of the transfer
forwarding		destination specified by absent service.
	No setting	No transfer destination for absent service is set.

Click the Close button.

Maintenance 45

Image 53

Contents

Version Installation GuideSafety Warning Page Contents Important Equipment Information Setup VoIP-TA setting WindowImportant Safety Instructions Important Safety Instructions Welcome to the world of Oki Internet telephony… IntroductionVoIP-TA FeaturesOutline LEDs Front PanelBack Panel ConnectorsWhen using IP network only When using both IP and PstnMode StatusConnections II InstallationAnalogue telephone or G3 facsimile equipment Analogue PstnPersonal computer PC Power sourceDuring use During installationGeneral Operation III Placing CallsVia an IP Network Third party incoming call during another call ServicesCall transfer during a telephone call End-to-end service using Dtmf signalingPlacing Calls How to cancel the absent service Absent serviceHow to register the absent service Using both a Pstn line and the IP network Details of ServicesLine selection Third party incoming call during another callFor Pstn line not receiving services using hookflash hooking Identification of incoming call Power failure switchingTranslating IP Address for VoIP Using the IP network onlySetting IP Address Maintenance Console Software Requirements IV SetupInstalling the Maintenance Console Software Maintenance Console Software CompatibilityData Setup Procedure Functions of the Maintenance Console SoftwareMode Function Password, see Chapter V,Activating and Deactivating the Software’s Functions New connection window will appear Changing to the Setup mode Changing Modes and Setup ConditionsChanging setup conditions Saving all setup conditions in a file Reading information From the file Descriptions Default Basic settings for Pstn lineSelect outgoing destination below For Pstn lineSelect outgoing destination Description DefaultSelect Use Pstn line, Use VoIP line or Unavailable to dial Neglect firstDailing IP address Number 1st Outgoing Neglect Digit Destination 1st digitDialed, excluding the first digit and 901 connects the call Number VoIP-TA operation DialedDialed, excluding the first digit and 567 connects the call Dialed, excluding the first digit and 789 connects the callDetailed settings for Pstn line Network settings UDP port No Specifies the UDP port number for communication Global address space Network Address Translation NATStatic IP Masquerade with port number translations To select Unicast GRQ or Multicast GRQ when Gatekeeper settingsBRQ DRQ GRQ Detailed Gatekeeper settingsAddress table display editing Sorting the list using each row as a key Sort with keyAddress table Setup Button see pages 42 DetailsDescription RTP/RTCP Voice settingsVoice codec Voice codec setting and bandwidth usedSetting ms Byte TCP/UDP FAX settingSlic setting Verifying the Software Version Information MaintenanceFunctions of the Maintenance Console Software Checking the Operation Status of the VoIP-TA Explanation of the displayed information Display Displayed contents DescriptionUpdating Unit Programs Changing the password Symptom Items to check VI TroubleshootingRemote mode Local modePort number VII SpecificationsUsage Important Equipment Information Following the warranty period Warranty and ServiceWarranty Period London Office Oki Service Offices