Oki 1.2 manual Mode, Status, With gatekeeper, Without gatekeeper, When using both IP and Pstn

Page 12

Table 1

Mode	ALARM-LED	LINE-LED	Status
Initialization	Blinks	OFF	With gatekeeper:
(1 sec.			The system will wait for
intervals)			LAN link to be established while
			gatekeeper registers the VoIP-TA.
			Without gatekeeper:
			The system will wait for a LAN link to
			be established.
Operation	OFF	OFF	Standby
	OFF	ON	The telephone line is busy.
	OFF	Blinks (1 sec.	When using both IP and PSTN:
		intervals)	The PSTN is on hold during VoIP calls.
			When using IP network only:
			The absent service is setting up.
	Blinks (0.5 sec.		The handset is off the hook and the
	intervals)	OFF	howler tone has already stopped.
Setup	Blinks (0.2 sec.	Blinks (0.2 sec.	Normal operation is not available in
	intervals)	intervals)	the Setup mode.
Installation	Blinks (0.2 sec.	Blinks (1 sec.	Normal operation is not available in
	intervals)	intervals)	the Install mode. The LED lamp may
			blink irregularly during the program
			installation.

4Outline

Image 12

Contents

Installation Guide VersionSafety Warning Page Contents Setup VoIP-TA setting Window Important Equipment InformationImportant Safety Instructions Important Safety Instructions Introduction Welcome to the world of Oki Internet telephony…Features OutlineVoIP-TA Front Panel LEDsConnectors Back PanelWhen using both IP and Pstn When using IP network onlyMode StatusII Installation ConnectionsAnalogue telephone or G3 facsimile equipment Analogue PstnPower source Personal computer PCDuring installation During useIII Placing Calls Via an IP NetworkGeneral Operation Services Third party incoming call during another callEnd-to-end service using Dtmf signaling Call transfer during a telephone callPlacing Calls Absent service How to register the absent serviceHow to cancel the absent service Details of Services Using both a Pstn line and the IP networkLine selection Third party incoming call during another callFor Pstn line not receiving services using hookflash hooking Power failure switching Identification of incoming callUsing the IP network only Setting IP AddressTranslating IP Address for VoIP IV Setup Maintenance Console Software RequirementsInstalling the Maintenance Console Software Maintenance Console Software CompatibilityFunctions of the Maintenance Console Software Data Setup ProcedureMode Function Password, see Chapter V,Activating and Deactivating the Software’s Functions New connection window will appear Changing Modes and Setup Conditions Changing to the Setup modeChanging setup conditions Saving all setup conditions in a file Reading information From the file Basic settings for Pstn line Descriptions DefaultSelect outgoing destination below For Pstn lineDescription Default Select outgoing destinationSelect Use Pstn line, Use VoIP line or Unavailable to dial Neglect first1st Outgoing Neglect Digit Destination 1st digit Dailing IP address NumberNumber VoIP-TA operation Dialed Dialed, excluding the first digit and 901 connects the callDialed, excluding the first digit and 567 connects the call Dialed, excluding the first digit and 789 connects the callDetailed settings for Pstn line Network settings UDP port No Specifies the UDP port number for communication Network Address Translation NAT Global address spaceStatic IP Masquerade with port number translations Gatekeeper settings To select Unicast GRQ or Multicast GRQ whenDetailed Gatekeeper settings BRQ DRQ GRQSorting the list using each row as a key Sort with key Address tableAddress table display editing Setup Details DescriptionButton see pages 42 Voice settings RTP/RTCPVoice codec setting and bandwidth used Setting ms ByteVoice codec FAX setting TCP/UDPSlic setting Maintenance Functions of the Maintenance Console SoftwareVerifying the Software Version Information Checking the Operation Status of the VoIP-TA Display Displayed contents Description Explanation of the displayed informationUpdating Unit Programs Changing the password VI Troubleshooting Symptom Items to checkRemote mode Local modeVII Specifications UsagePort number Important Equipment Information Warranty and Service Warranty PeriodFollowing the warranty period Oki Service Offices London Office