Emerson 48330 user manual First page of the Batt. Selection is shown below

Battery Setting

Batt. Selection

LVD Setting

Charge

Battery Setting

Batt. Test

Temp Comp

What follows is the description of the parameter functions and values by dividing them into 5 small categories and 5 big categories.

5.7.2Batt. Selection

1.The first page of the Batt. Selection is shown below:

Mode: Manual

Capacity: 300Ah

Batt Name: 1#

Use “ ” or “ ” to select the page and the parameter to be set, and “ ” or “ ” to select the proper value for the parameter. Press “ENT” to confirm.

After setting the “Battery Type”, the following prompt will appear, asking you to name a certain type of battery for the sake of identifying them:

Battery Name:

Batt1

To name a rectifier, you can use “ ” or “ ” to change the number, and “ ” or “ ” to move the cursor left or right. Press “ENT” to confirm afterwards.

2.If setting parameter “System Type” does not require setting the battery shunt coefficient, the second page of the basic battery settings is as follows:

Batt Shunt1:

Y

Batt Shunt2:

Y

ACTURA Flex 48330 Power System User Manual