DHCP Server
If you are working with a DHCP (Dynamic Host Configuration Protocol) server, the following items are set automatically.
1:IPADDRESS
2:SUBNETMASK
3:DEFAULT GATEWAY
8:DNS P .SRVADDRESS
Domain Name Service Primary Server
9:DNS S .SRVADDRESS
Domain Name Service Secondary Server
!The default DHCP setting is Enable.
!When you enter an IP Address from the front panel of your fax unit, the IP Address is used as a static IP address. The DHCP setting is automatically disabled. To enable the DHCP setting, use the Web Page, OkiView 32, or Telnet functions.
After changing the network settings under User Function 98, press MENU.
The machine goes into standby mode.
After a few seconds’ pause, the display shows that the Network Card is being initialized. The data on the Network Card is updated when this message disappears.
Do not press MENU again while the initialization message is on display (after changing the settings); if you do, the settings will not update correctly.
T.37 Option Guide: English 39