Operating Systems
NetWare
Recommended procedure:
1Install the printer driver.
2Install the network card utility.
3Configure the network card. The NetWare server has two modes.
·printer server mode and
·remote printer mode
The Network Card supports either mode.
To use NetWare, the fax machine should be attached as a printer under NetWare control.
For more details, see the information on the supplied
Windows NT 4.0 and Windows 2000
Recommended procedure:
1Install the printer driver.
2Install the network card utility.
3Configure the network card.
When printing directly from Windows NT 4.0 or 2000, use LPR (Microsoft TCP/IP Printing), included in Windows NT 4.0 and 2000.
Add the LPR port as the driver output port and assign it the IP Address configured for Network Card.
TCP/IP should be added to Windows NT 4.0, 2000 because it is used for LPR.
!While installing the driver on Windows 2000, you may encounter a warning message about authentication.
Ignore this message if it appears.
It will not cause any problems with the installation of the driver.
For more details, see the information on the supplied