P72895_F1D104-OSD-univ_man.qxd 7/16/01 3:24 PM Page 11
Usage
Selecting which computer to operate can be done either by
The CHANNEL Button:
En
Pressing the CHANNEL button cycles you through all the ports, including inactive ports.
1 
2 
3 
4
Keyboard “Hot” Key commands:
You can also conveniently command the OmniView™ PRO to switch ports through simple keyboard key sequences. To send commands to the OmniView™ PRO, the SCROLL LOCK key must be pressed twice within 2 seconds. You will hear a beep for confirmation. Below are the different commands:
Switch to PREVIOUS ACTIVE port (on the same BANK)
Switch to NEXT ACTIVE port (on the same BANK)
Switch to the PREVIOUS BANK
(by default, selects first active port on that BANK)
Switch to the NEXT BANK
(by default, selects first active port on that BANK)
Directly switches to port Y on BANK X. (X = {0 to 3} g = {1 to 4})
Resets the OmniView™ PRO to detect “lost” mouse, keyboard or a newly added slave unit.
You can switch directly to any port by giving the OmniView™ PRO the BANK and PORT numbers. For instance, if you press [SCROLL LOCK] [SCROLL LOCK] [2] [2], the computer on PORT 2 of the OmniView™ PRO set to BANK 2 will be selected. In the following diagram, that is PC # 10. Hence, if you only have one OmniView™ PRO, the first key (X) must be "0".
11