IBM M22 MFP manual Attaching the caster base to the 2000-sheet drawer, Topic Go to

Page 11

Note: Be sure to set up the items in the order listed in the table.

5Place power adapter bracket (1) aside for later use. The other power adapter bracket is not used with this scanner and can be discarded.

Use the following table to locate the instructions you need to set up your printer and the paper handling options you purchased.

Topic	Go to page...
Attaching the caster base to the 2000-sheet drawer	5

Assembling the caster base for the 500 or 250-sheet	8
drawer

Installing the duplex unit	11

Positioning the printer	12

Attaching the caster base to the 2000-sheet drawer

1Remove and inventory all items from the 2000-sheet drawer carton.

•2000-sheet drawer

•Decals

•16 AWG power cord

•Jumper cord

2Place the decals, 16 AWG power cord, and jumper cord aside for later use.

3Remove the two screws inside the 2000-sheet drawer pockets.

Use a number 2 Phillips screwdriver to remove the screws and install the caster base.

If you have difficulty lifting the screws from the pockets, you can wait until the next step when you turn the drawer over, then the screws should fall out.

Assemble paper handling options

5

Image 11

Contents IBM Page IBM Edition January Contents Solve setup problems Maintain your scanner Notices Turning off the printer Using this bookGet started Selecting a location for your printer and MFP Shelf, and scanner Customizing your MFP optionPreparing the caster base Assemble paper handling optionsTopic Go to Attaching the caster base to the 2000-sheet drawerDrawer bottom Front Assemble paper handling options Assemble paper handling options Base Installing screws500-sheet Drawer and casterAssemble paper handling options Installing the duplex unit Positioning the printer Assemble paper handling options Removing the shield Installing printer memory and network optionsCard Installing memoryInstalling a firmware Reattaching the shield Closing the doors Removing the print cartridge packaging Set up the printerAttaching decals and overlay Loading paper Attaching the printer cables Verifying printer setupPrinting a menu settings Assigning a printer IP address Configuring forPrinting a network setup Printing Quick Reference informationAttaching the scanner shelf Verifying the IP settingsSet up the printer Install the scanner Install the feed tray and paper stop Install the feed tray and paper stop Attaching cables to the printer Attach cables and power cordsAttaching cables to the scanner Turn on the scanner and printer Performing a power up sequencePlease Set Date/Time Manually changing settings Change your default copy settingsUsing MarkVision Professional Using your browserUnderstanding FCC fax requirements Set send and receive fax informationPerforming manual fax setup Performing browser fax setup Setting up a fax transmission log Changing optional settingsUsing MarkVision Professional to set fax information Enabling fax server function Creating permanent fax destinationsPerforming Scan to Network General Setup Set up network scanningSpecify Smtp gateway and other E-mail settings Creating permanent FTP destinations Click FTP Destinations SetupSending a test fax Verify MFP setupTesting scan to network Distribute MFP user instructions Problem Solution Solve setup problemsClearing a paper Jam Maintain your scannerCleaning the automatic document feeder Document glass CleaningMoving the scanner Replacing the pad assembly Pad clamp Electronic emission notices Industry Canada CS-03 notice European Community EC directives conformity South Africa telecommunications notice Page Readers Comments Ð Wed Like to Hear from You Business Reply Mail Page Ibmr