IBM M22 MFP manual Installing memory, Installing a firmware, Card

Page 21

Installing memory	1	Unpack the memory option.
	2	Open both latches on the connector.
	3	Push the memory card firmly into the connector until it snaps
		into place.

Installing a firmware	1 Locate the holes on the system board near the option card
card		connectors.
	2	Unpack the firmware card.
	3	Holding the firmware card by its sides, align the two pins on the
		card with the holes on the system board.
	4	Push in until the firmware card is firmly in place.

Installing an option card 1 Locate the card connectors on the system board. If you are installing only one card, install it in connector 1.

2Locate the two screws on the back of the printer that attach the

metal plate to the slot.

3Remove and save the two screws, and then remove and discard the plate.

4 Unpack the card.

5 Align the connection points on the card with the connector on the system board and push the card firmly into the system board connector.

Assemble paper handling options

15

Image 21

Contents IBM Page IBM Edition January Contents Solve setup problems Maintain your scanner Notices Using this book Get startedTurning off the printer Selecting a location for your printer and MFP Shelf, and scanner Customizing your MFP optionPreparing the caster base Assemble paper handling optionsTopic Go to Attaching the caster base to the 2000-sheet drawerDrawer bottom Front Assemble paper handling options Assemble paper handling options 500-sheet Installing screwsDrawer and caster BaseAssemble paper handling options Installing the duplex unit Positioning the printer Assemble paper handling options Removing the shield Installing printer memory and network optionsInstalling memory Installing a firmwareCard Reattaching the shield Closing the doors Removing the print cartridge packaging Set up the printerAttaching decals and overlay Loading paper Verifying printer setup Printing a menu settingsAttaching the printer cables Printing a network setup Configuring forPrinting Quick Reference information Assigning a printer IP addressAttaching the scanner shelf Verifying the IP settingsSet up the printer Install the scanner Install the feed tray and paper stop Install the feed tray and paper stop Attaching cables to the printer Attach cables and power cordsAttaching cables to the scanner Turn on the scanner and printer Performing a power up sequencePlease Set Date/Time Manually changing settings Change your default copy settingsUsing MarkVision Professional Using your browserUnderstanding FCC fax requirements Set send and receive fax informationPerforming manual fax setup Performing browser fax setup Changing optional settings Using MarkVision Professional to set fax informationSetting up a fax transmission log Enabling fax server function Creating permanent fax destinationsPerforming Scan to Network General Setup Set up network scanningSpecify Smtp gateway and other E-mail settings Creating permanent FTP destinations Click FTP Destinations SetupVerify MFP setup Testing scan to networkSending a test fax Distribute MFP user instructions Problem Solution Solve setup problemsClearing a paper Jam Maintain your scannerCleaning the automatic document feeder Document glass CleaningMoving the scanner Replacing the pad assembly Pad clamp Electronic emission notices Industry Canada CS-03 notice European Community EC directives conformity South Africa telecommunications notice Page Readers Comments Ð Wed Like to Hear from You Business Reply Mail Page Ibmr