IBM M22 MFP manual Installing the duplex unit

Page 17

Installing the duplex unit

5Place the drawer on top of the previously installed drawer or caster base.

6Insert two short stabilizer screws (2) into the pockets of the 250-sheet drawer.

The screws go through the drawer and into the top of the screws of the previously installed drawer or into the caster frame assembly.

7Tighten the screws securely.

1Remove the duplex unit from the carton.

2Remove all packing material and tape.

3If you are using a table or printer stand, then place the duplex unit in that location and go to “Positioning the printer” on page 12, otherwise continue to step 4.

4Use a flat tip screwdriver to remove the rubber feet from the bottom of the duplex unit.

Assemble paper handling options

11

Image 17

Contents IBM Page IBM Edition January Contents Solve setup problems Maintain your scanner Notices Turning off the printer Using this bookGet started Selecting a location for your printer and MFP Shelf, and scanner Customizing your MFP optionPreparing the caster base Assemble paper handling optionsTopic Go to Attaching the caster base to the 2000-sheet drawerDrawer bottom Front Assemble paper handling options Assemble paper handling options 500-sheet Installing screwsDrawer and caster BaseAssemble paper handling options Installing the duplex unit Positioning the printer Assemble paper handling options Removing the shield Installing printer memory and network optionsCard Installing memoryInstalling a firmware Reattaching the shield Closing the doors Removing the print cartridge packaging Set up the printerAttaching decals and overlay Loading paper Attaching the printer cables Verifying printer setupPrinting a menu settings Printing a network setup Configuring forPrinting Quick Reference information Assigning a printer IP addressAttaching the scanner shelf Verifying the IP settingsSet up the printer Install the scanner Install the feed tray and paper stop Install the feed tray and paper stop Attaching cables to the printer Attach cables and power cordsAttaching cables to the scanner Turn on the scanner and printer Performing a power up sequencePlease Set Date/Time Manually changing settings Change your default copy settingsUsing MarkVision Professional Using your browserUnderstanding FCC fax requirements Set send and receive fax informationPerforming manual fax setup Performing browser fax setup Setting up a fax transmission log Changing optional settingsUsing MarkVision Professional to set fax information Enabling fax server function Creating permanent fax destinationsPerforming Scan to Network General Setup Set up network scanningSpecify Smtp gateway and other E-mail settings Creating permanent FTP destinations Click FTP Destinations SetupSending a test fax Verify MFP setupTesting scan to network Distribute MFP user instructions Problem Solution Solve setup problemsClearing a paper Jam Maintain your scannerCleaning the automatic document feeder Document glass CleaningMoving the scanner Replacing the pad assembly Pad clamp Electronic emission notices Industry Canada CS-03 notice European Community EC directives conformity South Africa telecommunications notice Page Readers Comments Ð Wed Like to Hear from You Business Reply Mail Page Ibmr