IBM M22 MFP manual Positioning the printer

Page 18

Positioning the printer

5Place the duplex unit on top of any installed drawers.

If you are not using a caster base, place the duplex unit on a table or optional printer stand and go to “Positioning the printer.”

6Make sure the drawers and duplex unit lock together securely.

7Insert two long stabilizer posts (3) into the pockets of the duplex unit.

The posts go through the duplex unit and into the top of the screws of the previously installed drawer.

8Tighten the posts securely.

1Open the printer box and then remove all items from the box.

2Make sure you have the following items:

•Printer

•Power cord

•Setup Guide with a publications CD

•Operator panel language overlays

•Drivers CD

•Wire bail

•Operator panel protector overlay

3Place all items except the printer aside for later use.

4If you are using a table or printer stand, then place the printer in that location and go to step 9 on page 13, otherwise continue to step 5.

5Gently place the printer on its back.

6Use a flat tip screwdriver to remove the rubber feet from the bottom of the printer.

7Gently place the printer right side up.

Assemble paper handling options

12

Image 18

Contents IBM Page IBM Edition January Contents Solve setup problems Maintain your scanner Notices Using this book Get startedTurning off the printer Selecting a location for your printer and MFP Customizing your MFP option Shelf, and scannerAssemble paper handling options Preparing the caster baseAttaching the caster base to the 2000-sheet drawer Topic Go toDrawer bottom Front Assemble paper handling options Assemble paper handling options Drawer and caster Installing screws500-sheet BaseAssemble paper handling options Installing the duplex unit Positioning the printer Assemble paper handling options Installing printer memory and network options Removing the shieldInstalling memory Installing a firmwareCard Reattaching the shield Closing the doors Set up the printer Removing the print cartridge packagingAttaching decals and overlay Loading paper Verifying printer setup Printing a menu settingsAttaching the printer cables Printing Quick Reference information Configuring forPrinting a network setup Assigning a printer IP addressVerifying the IP settings Attaching the scanner shelfSet up the printer Install the scanner Install the feed tray and paper stop Install the feed tray and paper stop Attach cables and power cords Attaching cables to the printerAttaching cables to the scanner Performing a power up sequence Turn on the scanner and printerPlease Set Date/Time Change your default copy settings Manually changing settingsUsing your browser Using MarkVision ProfessionalSet send and receive fax information Understanding FCC fax requirementsPerforming manual fax setup Performing browser fax setup Changing optional settings Using MarkVision Professional to set fax informationSetting up a fax transmission log Creating permanent fax destinations Enabling fax server functionSet up network scanning Performing Scan to Network General SetupSpecify Smtp gateway and other E-mail settings Click FTP Destinations Setup Creating permanent FTP destinationsVerify MFP setup Testing scan to networkSending a test fax Distribute MFP user instructions Solve setup problems Problem SolutionMaintain your scanner Clearing a paper JamCleaning the automatic document feeder Cleaning Document glassMoving the scanner Replacing the pad assembly Pad clamp Electronic emission notices Industry Canada CS-03 notice European Community EC directives conformity South Africa telecommunications notice Page Readers Comments Ð Wed Like to Hear from You Business Reply Mail Page Ibmr