IBM M22 MFP manual Performing browser fax setup

Page 40

Performing browser fax setup

Note: Configuration is a task usually done by a network administrator. If you are prompted for a password during the following instructions, see your network administrator for help.

Note: During printer power up, if the print server is configured to use Network Time Protocol (NTP) time, the current date and time are provided. However, you must set the time zone to get the correct time.

After the IP address is set, use your browser to set the required fax information. You can also configure the MFP to route faxes received through the fax modem port on the print server (with modem) to an output bin on your printer.

1Type the IP address of the MFP in the URL field of your browser (for example, http://192.168.236.24), and then press Enter.

2Click Configuration.

3Under the MFP heading, click Fax Setup.

4Click Configuration.

If you are changing fax modes, you must click Submit before you can access the configuration page.

5Enter the required FCC information:

•Current date and time

•Station name (personal name or company name)

•Station number (fax phone line number)

6Select the Time Zone, such as Eastern (USA and Canada, Eastern Standard Time). This sets the required information.

7Set your options for Fax storage, Output bin, Rings to Answer, and so on.

For a complete list of receive fax options, refer to the online documentation on the MFP CD.

8After you finish entering the information, click Submit.

Set send and receive fax information

34

Image 40

Contents IBM Page IBM Edition January Contents Solve setup problems Maintain your scanner Notices Get started Using this bookTurning off the printer Selecting a location for your printer and MFP Customizing your MFP option Shelf, and scannerAssemble paper handling options Preparing the caster baseAttaching the caster base to the 2000-sheet drawer Topic Go toDrawer bottom Front Assemble paper handling options Assemble paper handling options Installing screws 500-sheetDrawer and caster BaseAssemble paper handling options Installing the duplex unit Positioning the printer Assemble paper handling options Installing printer memory and network options Removing the shieldInstalling a firmware Installing memoryCard Reattaching the shield Closing the doors Set up the printer Removing the print cartridge packagingAttaching decals and overlay Loading paper Printing a menu settings Verifying printer setupAttaching the printer cables Configuring for Printing a network setupPrinting Quick Reference information Assigning a printer IP addressVerifying the IP settings Attaching the scanner shelfSet up the printer Install the scanner Install the feed tray and paper stop Install the feed tray and paper stop Attach cables and power cords Attaching cables to the printerAttaching cables to the scanner Performing a power up sequence Turn on the scanner and printerPlease Set Date/Time Change your default copy settings Manually changing settingsUsing your browser Using MarkVision ProfessionalSet send and receive fax information Understanding FCC fax requirementsPerforming manual fax setup Performing browser fax setup Using MarkVision Professional to set fax information Changing optional settingsSetting up a fax transmission log Creating permanent fax destinations Enabling fax server functionSet up network scanning Performing Scan to Network General SetupSpecify Smtp gateway and other E-mail settings Click FTP Destinations Setup Creating permanent FTP destinationsTesting scan to network Verify MFP setupSending a test fax Distribute MFP user instructions Solve setup problems Problem SolutionMaintain your scanner Clearing a paper JamCleaning the automatic document feeder Cleaning Document glassMoving the scanner Replacing the pad assembly Pad clamp Electronic emission notices Industry Canada CS-03 notice European Community EC directives conformity South Africa telecommunications notice Page Readers Comments Ð Wed Like to Hear from You Business Reply Mail Page Ibmr