IBM M22 MFP manual Please Set Date/Time

Page 35

6Wait for the MFP to initialize. When the scanner comes on, there is a short wait cycle while the firmware is initialized. Please Set Date/Time is displayed on the first line of the MFP control panel and “Please Wait...” is displayed on the second line.

Do not turn off the printer or unplug the scanner until the Please Wait... message disappears from the control panel.

First time setup

MFP panel:

When initialization is completed, the Please

 

Please Set Date/Time

Wait... message disappears. The Please

 

Set Date/Time prompt indicates that you

 

Please Wait...

need to set required fax information.

 

 

 

 

 

Restart

MFP panel:

When you restart the MFP, a Please Wait...

 

 

message appears on the second line of the

 

 

control panel. When initialization is completed,

 

Please Wait...

the MFP control panel displays the current time

 

and date, plus the Ready message.

 

 

 

 

 

Printer

Printer panel:

When you turn on your printer after installing the

operator panel

24MB of memory required

MFP, you may see the message on the left. The

 

Analog Fax option is disabled unless there is a

 

for Fax...

minimum 24MB of printer memory.

 

 

If you receive this message, install additional

 

 

printer memory to meet or exceed the 24MB

 

 

requirement.

 

 

 

Hardware setup is now complete. You are ready to configure the MFP.

Turn on the scanner and printer

29

Page 34 Page 36
Image 35
Page 34 Page 36
Contents IBM Page IBM Edition January Contents Solve setup problems Maintain your scanner Notices Turning off the printer Using this bookGet started Selecting a location for your printer and MFP Shelf, and scanner Customizing your MFP optionPreparing the caster base Assemble paper handling optionsTopic Go to Attaching the caster base to the 2000-sheet drawerDrawer bottom Front Assemble paper handling options Assemble paper handling options Base Installing screws500-sheet Drawer and casterAssemble paper handling options Installing the duplex unit Positioning the printer Assemble paper handling options Removing the shield Installing printer memory and network optionsCard Installing memoryInstalling a firmware Reattaching the shield Closing the doors Removing the print cartridge packaging Set up the printerAttaching decals and overlay Loading paper Attaching the printer cables Verifying printer setupPrinting a menu settings Assigning a printer IP address Configuring forPrinting a network setup Printing Quick Reference informationAttaching the scanner shelf Verifying the IP settingsSet up the printer Install the scanner Install the feed tray and paper stop Install the feed tray and paper stop Attaching cables to the printer Attach cables and power cordsAttaching cables to the scanner Turn on the scanner and printer Performing a power up sequencePlease Set Date/Time Manually changing settings Change your default copy settingsUsing MarkVision Professional Using your browserUnderstanding FCC fax requirements Set send and receive fax informationPerforming manual fax setup Performing browser fax setup Setting up a fax transmission log Changing optional settingsUsing MarkVision Professional to set fax information Enabling fax server function Creating permanent fax destinationsPerforming Scan to Network General Setup Set up network scanningSpecify Smtp gateway and other E-mail settings Creating permanent FTP destinations Click FTP Destinations SetupSending a test fax Verify MFP setupTesting scan to network Distribute MFP user instructions Problem Solution Solve setup problemsClearing a paper Jam Maintain your scannerCleaning the automatic document feeder Document glass CleaningMoving the scanner Replacing the pad assembly Pad clamp Electronic emission notices Industry Canada CS-03 notice European Community EC directives conformity South Africa telecommunications notice Page Readers Comments Ð Wed Like to Hear from You Business Reply Mail Page Ibmr
Top Page Image Contents