IBM M22 MFP manual Attaching the printer cables, Verifying printer setup, Printing a menu settings

Page 25

Attaching the printer cables

Network cable

Printer power cord

1Connect the printer to a LAN drop or hub using standard cabling that is compatible with your network.

2Attach the printer power cord to the connector on the side of the printer.

3If you have a 2000-sheet drawer, connect the printer power cord into the socket on the back of the 2000-sheet drawer. Otherwise go to step 5.

4Connect the 16 AWG power cord to the socket on the back of the 2000-sheet drawer.

5Connect the 16 AWG power cord (or printer power cord if you do not have a 2000-sheet drawer) to a properly grounded outlet.

Verifying printer setup

Note: If you see a message other than Ready on the display, refer to the printer publications CD for instructions on clearing the message.

Printing a menu settings page

1Turn on the printer.

After the printer completes its internal tests, the Ready message is displayed.

2Turn on your computer and any other peripherals.

1Press Menu until you see Utilities Menu, and then press Select.

2Press Menu until you see Print Menus, and then press Select to print the page. The message Printing Menus appears on the display.

3Verify the options you installed are correctly listed under “Installed Features” and “Printer Information.”

Set up the printer

19

Image 25

Contents IBM Page IBM Edition January Contents Solve setup problems Maintain your scanner Notices Get started Using this bookTurning off the printer Selecting a location for your printer and MFP Shelf, and scanner Customizing your MFP optionPreparing the caster base Assemble paper handling optionsTopic Go to Attaching the caster base to the 2000-sheet drawerDrawer bottom Front Assemble paper handling options Assemble paper handling options 500-sheet Installing screwsDrawer and caster BaseAssemble paper handling options Installing the duplex unit Positioning the printer Assemble paper handling options Removing the shield Installing printer memory and network optionsInstalling a firmware Installing memoryCard Reattaching the shield Closing the doors Removing the print cartridge packaging Set up the printerAttaching decals and overlay Loading paper Printing a menu settings Verifying printer setupAttaching the printer cables Printing a network setup Configuring forPrinting Quick Reference information Assigning a printer IP addressAttaching the scanner shelf Verifying the IP settingsSet up the printer Install the scanner Install the feed tray and paper stop Install the feed tray and paper stop Attaching cables to the printer Attach cables and power cordsAttaching cables to the scanner Turn on the scanner and printer Performing a power up sequencePlease Set Date/Time Manually changing settings Change your default copy settingsUsing MarkVision Professional Using your browserUnderstanding FCC fax requirements Set send and receive fax informationPerforming manual fax setup Performing browser fax setup Using MarkVision Professional to set fax information Changing optional settingsSetting up a fax transmission log Enabling fax server function Creating permanent fax destinationsPerforming Scan to Network General Setup Set up network scanningSpecify Smtp gateway and other E-mail settings Creating permanent FTP destinations Click FTP Destinations SetupTesting scan to network Verify MFP setupSending a test fax Distribute MFP user instructions Problem Solution Solve setup problemsClearing a paper Jam Maintain your scannerCleaning the automatic document feeder Document glass CleaningMoving the scanner Replacing the pad assembly Pad clamp Electronic emission notices Industry Canada CS-03 notice European Community EC directives conformity South Africa telecommunications notice Page Readers Comments Ð Wed Like to Hear from You Business Reply Mail Page Ibmr