Fujitsu D5200 Transporting the PC, Cleaning the PC, Cleaning the system unit and the monitor

Page 10

Transporting the PC

CAUTION

Transport all parts separately in their original packaging or in a packaging which protects them from knocks and jolts, to the new site. Do not unpack them until all transportation manoeuvres are completed.

Never drop the monitor!

Cleaning the PC

CAUTION

Turn off all power and equipment switches and remove the power plug from the mains supply. Do not clean any interior parts yourself, leave this job to a service technician.

Do not use any cleaning agents that contain abrasives or may corrode plastic. Ensure that no liquid enters the system.

Ensure that the ventilation areas of the system unit and the monitor are free.

Cleaning the system unit and the monitor

Wipe the system unit and monitor casing with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully wrung out.

x

D5200_0(INTRO)

10

12/7/06, 10:58 am

Image 10

Contents Esprimo D5200 User’s Manual Declaration of ConformityImportant Safety Instructions Class 1 Laser Products For Safe Operation Using this Product for High-Safety ApplicationsBefore Reading this Manual Backing Up the DataSoftware License Agreement Microsoft Service PackUse of the software Temperature and humidity condition Keep the accompanying CD-ROMs in a safe placeIntroduction Conventions Used in this ManualNotational conventions Manufacturer’s notes SafetyImportant Notes Energy savingFCC Class B Compliance Statement Cleaning the system unit and the monitor Cleaning the PCTransporting the PC To individual customers Disposal and recycling Disposal of the PC unitTo institutional and corporate customers Disposal of the LCD unitXii Organization of This Manual Before Reading This ManualContents External devices Steps for Initial SetupUnpacking and Checking the Delivery Drives and boardsSetting Up the PC Installing the FeetVertical positioning Horizontal positioning Point Connecting standard keyboard Connecting the keyboardConnecting the mouse Connect the Monitor, Mouse and KeyboardInitial Switch-on Software will be Installed Switching on monitor and PCConnecting cables Connecting External DevicesDisconnecting cables Connections on the system unit Settings of the serial port Connecting external devices to the serial portConnecting external devices to the parallel port Settings of the parallel portSwitching On the PC Switching Off the PCFront Panels of the Main Unit of the Personal Computer Power indicatorVent Floppy disk access indicator Disc access indicatorCD access indicator USB portsBack Panel of the Main Unit of the Personal Computer Keyboard port Main switchMouse port Monitor portKeyboard Point Floppy Disks Settings in Bios SetupWorking with Floppy Disks Check that the upper cover has been firmly installed Anti-theft Protection and Lead-sealingMains voltage supply is faulty Installing New SoftwareInternal power supply overloaded Screen stays blank Wrong monitor has been set under Window XP No Mouse Pointer Displayed on the ScreenFloppy Disk Cannot be Read or Written Wrong RAM modules have been insertedTime and/or Date is not Correct Error Messages on the ScreenRestoring the Hard Disk Contents TipsSystem Expansion Information about BoardsPrecautions Before Connecting Peripheral DevicesInstall one peripheral device only at one time Use Acpi support peripheral devices Do not disassemble the power unitTaking precautions to static electricity Preparing screwdriversHow to remove the main unit cover Removing the Main Unit CoverInstalling Memory Memory to be installed Locations for memory to be installedTable of combinations of memory Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Locations for expansion cards to be installed Expansion cards to be installedInstalling expansion cards Press and raise the slot cover lock Remove the slot coverInstall the installing fitting Insert the expansion card into the portElectrical Data Point D5200533-39 12/7/06, 1100 am