Fujitsu D5200 user manual Screen stays blank

Page 35

The screen stays blank

If your screen remains blank this may be due to the following:

Monitor is switched off

●Switch your monitor on.

Power saving has been activated (screen is blank)

●Press any key on the keyboard.

or

●Deactivate the screen saver. Enter the appropriate password.

Brightness control is set to dark

●Adjust the brightness control. For detailed information, please refer to the operating manual supplied with your monitor.

Power cable not connected

●Switch off the monitor and the PC.

●Check that the monitor power cable of the monitor is properly connected to the monitor and, depending on the connector, to the PC or to the grounded mains outlet.

●Check that the PC power cable is properly plugged into the PC and grounded mains outlet.

●Switch on the monitor and the PC.

Monitor cable not connected

●Switch off the monitor and PC.

●Check that the monitor cable is properly connected to the PC and monitor.

●Switch on the monitor and the PC.

21

D5200_3(20-23)

21

12/7/06, 10:59 am

Image 35

Contents Declaration of Conformity Esprimo D5200 User’s ManualImportant Safety Instructions Class 1 Laser Products Backing Up the Data Using this Product for High-Safety ApplicationsBefore Reading this Manual For Safe OperationUse of the software Microsoft Service PackSoftware License Agreement Keep the accompanying CD-ROMs in a safe place Temperature and humidity conditionNotational conventions Conventions Used in this ManualIntroduction Energy saving SafetyImportant Notes Manufacturer’s notesFCC Class B Compliance Statement Transporting the PC Cleaning the PCCleaning the system unit and the monitor Disposal of the LCD unit Disposal and recycling Disposal of the PC unitTo institutional and corporate customers To individual customersXii Before Reading This Manual Organization of This ManualContents Drives and boards Steps for Initial SetupUnpacking and Checking the Delivery External devicesInstalling the Feet Setting Up the PCVertical positioning Horizontal positioning Point Connect the Monitor, Mouse and Keyboard Connecting the keyboardConnecting the mouse Connecting standard keyboardSwitching on monitor and PC Initial Switch-on Software will be InstalledDisconnecting cables Connecting External DevicesConnecting cables Connections on the system unit Settings of the parallel port Connecting external devices to the serial portConnecting external devices to the parallel port Settings of the serial portSwitching Off the PC Switching On the PCVent Power indicatorFront Panels of the Main Unit of the Personal Computer USB ports Disc access indicatorCD access indicator Floppy disk access indicatorBack Panel of the Main Unit of the Personal Computer Monitor port Main switchMouse port Keyboard portKeyboard Point Working with Floppy Disks Settings in Bios SetupFloppy Disks Anti-theft Protection and Lead-sealing Check that the upper cover has been firmly installedInternal power supply overloaded Installing New SoftwareMains voltage supply is faulty Screen stays blank Wrong RAM modules have been inserted No Mouse Pointer Displayed on the ScreenFloppy Disk Cannot be Read or Written Wrong monitor has been set under Window XPTips Error Messages on the ScreenRestoring the Hard Disk Contents Time and/or Date is not CorrectInformation about Boards System ExpansionInstall one peripheral device only at one time Before Connecting Peripheral DevicesPrecautions Preparing screwdrivers Do not disassemble the power unitTaking precautions to static electricity Use Acpi support peripheral devicesRemoving the Main Unit Cover How to remove the main unit coverInstalling Memory Table of combinations of memory Locations for memory to be installedMemory to be installed Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Expansion cards to be installed Locations for expansion cards to be installedPress and raise the slot cover lock Remove the slot cover Installing expansion cardsInsert the expansion card into the port Install the installing fittingElectrical Data Point D5200533-39 12/7/06, 1100 am