Fujitsu D5200 user manual Time and/or Date is not Correct, Error Messages on the Screen, Tips

Page 37

■Time and/or Date is not Correct

You can set the time and date in the BIOS Setup or in the operating system.

●Set the time and date.

If the time and date are repeatedly wrong when you switch on your PC, the on-board battery is flat.

CAUTION.

Do not touch the on-board battery. Risk of electric shock, burn and fire. Do not replace the on-board battery. Risk of explosion if battery is replaced by incorrect type. Please contact Fujitsu or the store where you purchased this products.

■Error Messages on the Screen

Error messages and their explanation are contained:

●In the technical manual for the mainboard

●In the "BIOS Setup" manual

●In the documentation for the programmes used

■Restoring the Hard Disk Contents

Should you need to restore your hard disk, the instructions are provided with the "Recovery CD" (delivered with your system).

■Tips

The PC cannot be switched off with the ON/OFF switch

Cause: The PC was not switched on with the ON/OFF switch.

●Press the ON/OFF switch again. Cause: System crash

●Press and hold the ON/OFF switch for at least four seconds until the PC switches off.

Out of system resources

If you have too many applications running at once, you may experience problems due to a lack of system resources. In this case you should:

●close unnecessary applications

or

●run the applications in a different order

23

D5200_3(20-23)

23

12/7/06, 10:59 am

Image 37

Contents Declaration of Conformity Esprimo D5200 User’s ManualImportant Safety Instructions Class 1 Laser Products Before Reading this Manual Using this Product for High-Safety ApplicationsFor Safe Operation Backing Up the DataSoftware License Agreement Microsoft Service PackUse of the software Keep the accompanying CD-ROMs in a safe place Temperature and humidity conditionIntroduction Conventions Used in this ManualNotational conventions Important Notes SafetyManufacturer’s notes Energy savingFCC Class B Compliance Statement Cleaning the system unit and the monitor Cleaning the PCTransporting the PC To institutional and corporate customers Disposal and recycling Disposal of the PC unitTo individual customers Disposal of the LCD unitXii Before Reading This Manual Organization of This ManualContents Unpacking and Checking the Delivery Steps for Initial SetupExternal devices Drives and boardsInstalling the Feet Setting Up the PCVertical positioning Horizontal positioning Point Connecting the mouse Connecting the keyboardConnecting standard keyboard Connect the Monitor, Mouse and KeyboardSwitching on monitor and PC Initial Switch-on Software will be InstalledConnecting cables Connecting External DevicesDisconnecting cables Connections on the system unit Connecting external devices to the parallel port Connecting external devices to the serial portSettings of the serial port Settings of the parallel portSwitching Off the PC Switching On the PCFront Panels of the Main Unit of the Personal Computer Power indicatorVent CD access indicator Disc access indicatorFloppy disk access indicator USB portsBack Panel of the Main Unit of the Personal Computer Mouse port Main switchKeyboard port Monitor portKeyboard Point Floppy Disks Settings in Bios SetupWorking with Floppy Disks Anti-theft Protection and Lead-sealing Check that the upper cover has been firmly installedMains voltage supply is faulty Installing New SoftwareInternal power supply overloaded Screen stays blank Floppy Disk Cannot be Read or Written No Mouse Pointer Displayed on the ScreenWrong monitor has been set under Window XP Wrong RAM modules have been insertedRestoring the Hard Disk Contents Error Messages on the ScreenTime and/or Date is not Correct TipsInformation about Boards System ExpansionPrecautions Before Connecting Peripheral DevicesInstall one peripheral device only at one time Taking precautions to static electricity Do not disassemble the power unitUse Acpi support peripheral devices Preparing screwdriversRemoving the Main Unit Cover How to remove the main unit coverInstalling Memory Memory to be installed Locations for memory to be installedTable of combinations of memory Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Expansion cards to be installed Locations for expansion cards to be installedPress and raise the slot cover lock Remove the slot cover Installing expansion cardsInsert the expansion card into the port Install the installing fittingElectrical Data Point D5200533-39 12/7/06, 1100 am