Fujitsu D5200 No Mouse Pointer Displayed on the Screen, Floppy Disk Cannot be Read or Written

Page 36

Wrong monitor has been set under Window XP

●Restart the PC.

●Press [F8] while the system is booting.

Either the Windows Advanced Start Options menu or the menu for selecting the operating system appears.

●If the menu for selecting the operating system appears, press [F8 ].

●Select Safe Mode or Safe Mode with Network.

●Set the correct values for the attached monitor as described in the operating manual of the monitor

by selecting Start → Settings → Control Panel → Display and then the Appearance, Themes, Settings tabs.

The wrong RAM modules have been inserted

See the technical manual for the mainboard for information on which memory modules can be used.

■No Mouse Pointer Displayed on the Screen

●Shut down the operating system properly.

●Switch the PC off.

●Check that the mouse cable is properly connected to the system unit.

If you use an adapter or extension lead with the mouse cable, check the connections.

●Make sure that only one mouse is connected.

● Switch the PC on.

The mouse controller must be enabled if you use a PS/2 mouse .

●Check in the BIOS Setup that the mouse controller is Enabled.

●Check that the mouse driver is properly installed and is present when the application programs is started. Detailed information can be found in the user guide for the mouse and application programme.

■The Floppy Disk Cannot be Read or Written

●Check that the write protection of the floppy disk drive is deactivated.

●Check the entry for Diskette A: in the Main menu of the BIOS Setup.

●Check that the floppy disk drive controller is enabled.

●Check that the cables of the floppy disk drive are properly connected.

22

D5200_3(20-23)

22

12/7/06, 10:59 am

Image 36

Contents Esprimo D5200 User’s Manual Declaration of ConformityImportant Safety Instructions Class 1 Laser Products Using this Product for High-Safety Applications Before Reading this ManualFor Safe Operation Backing Up the DataMicrosoft Service Pack Software License AgreementUse of the software Temperature and humidity condition Keep the accompanying CD-ROMs in a safe placeConventions Used in this Manual IntroductionNotational conventions Safety Important NotesManufacturer’s notes Energy savingFCC Class B Compliance Statement Cleaning the PC Cleaning the system unit and the monitorTransporting the PC Disposal and recycling Disposal of the PC unit To institutional and corporate customersTo individual customers Disposal of the LCD unitXii Organization of This Manual Before Reading This ManualContents Steps for Initial Setup Unpacking and Checking the DeliveryExternal devices Drives and boardsSetting Up the PC Installing the FeetVertical positioning Horizontal positioning Point Connecting the keyboard Connecting the mouseConnecting standard keyboard Connect the Monitor, Mouse and KeyboardInitial Switch-on Software will be Installed Switching on monitor and PCConnecting External Devices Connecting cablesDisconnecting cables Connections on the system unit Connecting external devices to the serial port Connecting external devices to the parallel portSettings of the serial port Settings of the parallel portSwitching On the PC Switching Off the PCPower indicator Front Panels of the Main Unit of the Personal ComputerVent Disc access indicator CD access indicatorFloppy disk access indicator USB portsBack Panel of the Main Unit of the Personal Computer Main switch Mouse portKeyboard port Monitor portKeyboard Point Settings in Bios Setup Floppy DisksWorking with Floppy Disks Check that the upper cover has been firmly installed Anti-theft Protection and Lead-sealingInstalling New Software Mains voltage supply is faultyInternal power supply overloaded Screen stays blank No Mouse Pointer Displayed on the Screen Floppy Disk Cannot be Read or WrittenWrong monitor has been set under Window XP Wrong RAM modules have been insertedError Messages on the Screen Restoring the Hard Disk ContentsTime and/or Date is not Correct TipsSystem Expansion Information about BoardsBefore Connecting Peripheral Devices PrecautionsInstall one peripheral device only at one time Do not disassemble the power unit Taking precautions to static electricityUse Acpi support peripheral devices Preparing screwdriversHow to remove the main unit cover Removing the Main Unit CoverInstalling Memory Locations for memory to be installed Memory to be installedTable of combinations of memory Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Locations for expansion cards to be installed Expansion cards to be installedInstalling expansion cards Press and raise the slot cover lock Remove the slot coverInstall the installing fitting Insert the expansion card into the portElectrical Data Point D5200533-39 12/7/06, 1100 am