Fujitsu D5200 user manual Anti-theft Protection and Lead-sealing

Page 33

■Anti-theft Protection and Lead-sealing

There are three ways to protect your PC from theft:

●With the Kensington Lock device (1) and with a Kensington MicroSaver

●With a chain (lead-seal)

●With a (pad)lock

To prevent unauthorised persons from opening the casing, the casing can be sealed. To do this, feed the sealing chain through the eye (2) and seal the chain with the lead seal.

You can also attach a padlock to the eye (2) to prevent unauthorised opening of the casing. You can also use this eye to anchor the casing if necessary.

■How to Lock the Main Unit of the Personal Computer (Rear Casing)

1 Check that the upper cover has been firmly installed.

POINT

The diameter of the hole for the security key installing fitting is 7.5 mm.

2 Install a commercially available key to the security key installing fitting.

19

D5200_2(11-19)

19

12/7/06, 10:59 am

Image 33

Contents Declaration of Conformity Esprimo D5200 User’s ManualImportant Safety Instructions Class 1 Laser Products Before Reading this Manual Using this Product for High-Safety ApplicationsFor Safe Operation Backing Up the DataMicrosoft Service Pack Software License AgreementUse of the software Keep the accompanying CD-ROMs in a safe place Temperature and humidity conditionConventions Used in this Manual IntroductionNotational conventions Important Notes SafetyManufacturer’s notes Energy savingFCC Class B Compliance Statement Cleaning the PC Cleaning the system unit and the monitorTransporting the PC To institutional and corporate customers Disposal and recycling Disposal of the PC unitTo individual customers Disposal of the LCD unitXii Before Reading This Manual Organization of This ManualContents Unpacking and Checking the Delivery Steps for Initial SetupExternal devices Drives and boardsInstalling the Feet Setting Up the PCVertical positioning Horizontal positioning Point Connecting the mouse Connecting the keyboardConnecting standard keyboard Connect the Monitor, Mouse and KeyboardSwitching on monitor and PC Initial Switch-on Software will be InstalledConnecting External Devices Connecting cablesDisconnecting cables Connections on the system unit Connecting external devices to the parallel port Connecting external devices to the serial portSettings of the serial port Settings of the parallel portSwitching Off the PC Switching On the PCPower indicator Front Panels of the Main Unit of the Personal ComputerVent CD access indicator Disc access indicatorFloppy disk access indicator USB portsBack Panel of the Main Unit of the Personal Computer Mouse port Main switchKeyboard port Monitor portKeyboard Point Settings in Bios Setup Floppy DisksWorking with Floppy Disks Anti-theft Protection and Lead-sealing Check that the upper cover has been firmly installedInstalling New Software Mains voltage supply is faultyInternal power supply overloaded Screen stays blank Floppy Disk Cannot be Read or Written No Mouse Pointer Displayed on the ScreenWrong monitor has been set under Window XP Wrong RAM modules have been insertedRestoring the Hard Disk Contents Error Messages on the ScreenTime and/or Date is not Correct TipsInformation about Boards System ExpansionBefore Connecting Peripheral Devices PrecautionsInstall one peripheral device only at one time Taking precautions to static electricity Do not disassemble the power unitUse Acpi support peripheral devices Preparing screwdriversRemoving the Main Unit Cover How to remove the main unit coverInstalling Memory Locations for memory to be installed Memory to be installedTable of combinations of memory Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Expansion cards to be installed Locations for expansion cards to be installedPress and raise the slot cover lock Remove the slot cover Installing expansion cardsInsert the expansion card into the port Install the installing fittingElectrical Data Point D5200533-39 12/7/06, 1100 am