Fujitsu D5200 user manual Installing New Software, Mains voltage supply is faulty

Page 34

Chapter 3 - Troubleshooting and Tips

CAUTION

Take note of the safety notes and in the "Preparing for use" chapter, when you connect or disconnect cables.

If a fault occurs, try to correct it as described in the following sections:

●in this chapter

●in the documentation of the connected devices

●in the help systems of the software used

●in the documentation of your operating system

If you fail to correct the problem, proceed as follows:

●Switch the PC off.

●Make a note of the steps and the circumstances that led to the fault.

●Make a note of any error messages displayed.

●Contact your sales outlet or our customer service centre.

■Installing New Software

When installing programs or drivers, important files may be overwritten and modified. To be able to access the original data in the event of any problems following installation, you should backup your hard disk prior to installation.

■Power-on Indicator Remains Unlit after you have Switched on your Device

This may be due to the following:

The mains voltage supply is faulty

●Check that the power cable is plugged properly into the system unit and grounded mains outlet.

●Switch on the PC.

Internal power supply overloaded

●Remove the PC’s power plug from the grounded mains outlet.

●Wait for a moment.

●Plug the power cable into the grounded mains outlet again.

●Switch on the PC.

20

D5200_3(20-23)

20

12/7/06, 10:59 am

Image 34

Contents Esprimo D5200 User’s Manual Declaration of ConformityImportant Safety Instructions Class 1 Laser Products For Safe Operation Using this Product for High-Safety ApplicationsBefore Reading this Manual Backing Up the DataSoftware License Agreement Microsoft Service PackUse of the software Temperature and humidity condition Keep the accompanying CD-ROMs in a safe placeIntroduction Conventions Used in this ManualNotational conventions Manufacturer’s notes SafetyImportant Notes Energy savingFCC Class B Compliance Statement Cleaning the system unit and the monitor Cleaning the PCTransporting the PC To individual customers Disposal and recycling Disposal of the PC unitTo institutional and corporate customers Disposal of the LCD unitXii Organization of This Manual Before Reading This ManualContents External devices Steps for Initial SetupUnpacking and Checking the Delivery Drives and boardsSetting Up the PC Installing the FeetVertical positioning Horizontal positioning Point Connecting standard keyboard Connecting the keyboardConnecting the mouse Connect the Monitor, Mouse and KeyboardInitial Switch-on Software will be Installed Switching on monitor and PCConnecting cables Connecting External DevicesDisconnecting cables Connections on the system unit Settings of the serial port Connecting external devices to the serial portConnecting external devices to the parallel port Settings of the parallel portSwitching On the PC Switching Off the PCFront Panels of the Main Unit of the Personal Computer Power indicatorVent Floppy disk access indicator Disc access indicatorCD access indicator USB portsBack Panel of the Main Unit of the Personal Computer Keyboard port Main switchMouse port Monitor portKeyboard Point Floppy Disks Settings in Bios SetupWorking with Floppy Disks Check that the upper cover has been firmly installed Anti-theft Protection and Lead-sealingMains voltage supply is faulty Installing New SoftwareInternal power supply overloaded Screen stays blank Wrong monitor has been set under Window XP No Mouse Pointer Displayed on the ScreenFloppy Disk Cannot be Read or Written Wrong RAM modules have been insertedTime and/or Date is not Correct Error Messages on the ScreenRestoring the Hard Disk Contents TipsSystem Expansion Information about BoardsPrecautions Before Connecting Peripheral DevicesInstall one peripheral device only at one time Use Acpi support peripheral devices Do not disassemble the power unitTaking precautions to static electricity Preparing screwdriversHow to remove the main unit cover Removing the Main Unit CoverInstalling Memory Memory to be installed Locations for memory to be installedTable of combinations of memory Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Locations for expansion cards to be installed Expansion cards to be installedInstalling expansion cards Press and raise the slot cover lock Remove the slot coverInstall the installing fitting Insert the expansion card into the portElectrical Data Point D5200533-39 12/7/06, 1100 am