Fujitsu D5200 Connecting external devices to the serial port, Settings of the serial port

Page 24

Connecting external devices to the serial port

External devices can be connected to the serial port (e.g. a modem).

●Connect the data cable to the external device.

●Connect the data cable to the serial port .

For an exact description of how to connect external devices to the serial port , please refer to the device documentation.

●Settings of the serial port

If you need to change the settings of the serial port (e.g. address, interrupt), you can do so in the BIOS Setup.

●Device drivers

The devices connected to the serial port require drivers. Your operating system already includes many drivers. Nevertheless, if the driver you need is not on the hard disk, please install it from the data carrier supplied with the device or with the application programme.

Connecting external devices to the parallel port

External devices can be connected to the parallel port (e.g. a printer).

●Connect the data cable to the external device.

●Connect the data cable to the parallel port .

For an exact description of how to connect external devices to the parallel port, please see the device documentation.

●Settings of the parallel port

If you need to change the settings of the parallel port (e.g. address, interrupt), you can do so in the BIOS Setup.

●Device drivers

The devices connected to the parallel port require drivers. Your operating system already includes many drivers. Nevertheless, if the driver you need is not on the hard disk, please install it from the data carrier supplied with the device or with the application programme.

10

D5200_1(01-10)

10

12/7/06, 10:59 am

Image 24

Contents Esprimo D5200 User’s Manual Declaration of ConformityImportant Safety Instructions Class 1 Laser Products Using this Product for High-Safety Applications Before Reading this ManualFor Safe Operation Backing Up the DataMicrosoft Service Pack Software License AgreementUse of the software Temperature and humidity condition Keep the accompanying CD-ROMs in a safe placeConventions Used in this Manual IntroductionNotational conventions Safety Important NotesManufacturer’s notes Energy savingFCC Class B Compliance Statement Cleaning the PC Cleaning the system unit and the monitorTransporting the PC Disposal and recycling Disposal of the PC unit To institutional and corporate customersTo individual customers Disposal of the LCD unitXii Organization of This Manual Before Reading This ManualContents Steps for Initial Setup Unpacking and Checking the DeliveryExternal devices Drives and boardsSetting Up the PC Installing the FeetVertical positioning Horizontal positioning Point Connecting the keyboard Connecting the mouseConnecting standard keyboard Connect the Monitor, Mouse and KeyboardInitial Switch-on Software will be Installed Switching on monitor and PCConnecting External Devices Connecting cablesDisconnecting cables Connections on the system unit Connecting external devices to the serial port Connecting external devices to the parallel portSettings of the serial port Settings of the parallel portSwitching On the PC Switching Off the PCPower indicator Front Panels of the Main Unit of the Personal ComputerVent Disc access indicator CD access indicatorFloppy disk access indicator USB portsBack Panel of the Main Unit of the Personal Computer Main switch Mouse portKeyboard port Monitor portKeyboard Point Settings in Bios Setup Floppy DisksWorking with Floppy Disks Check that the upper cover has been firmly installed Anti-theft Protection and Lead-sealingInstalling New Software Mains voltage supply is faultyInternal power supply overloaded Screen stays blank No Mouse Pointer Displayed on the Screen Floppy Disk Cannot be Read or WrittenWrong monitor has been set under Window XP Wrong RAM modules have been insertedError Messages on the Screen Restoring the Hard Disk ContentsTime and/or Date is not Correct TipsSystem Expansion Information about BoardsBefore Connecting Peripheral Devices PrecautionsInstall one peripheral device only at one time Do not disassemble the power unit Taking precautions to static electricityUse Acpi support peripheral devices Preparing screwdriversHow to remove the main unit cover Removing the Main Unit CoverInstalling Memory Locations for memory to be installed Memory to be installedTable of combinations of memory Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Locations for expansion cards to be installed Expansion cards to be installedInstalling expansion cards Press and raise the slot cover lock Remove the slot coverInstall the installing fitting Insert the expansion card into the portElectrical Data Point D5200533-39 12/7/06, 1100 am