Fujitsu D5200 user manual Settings in Bios Setup, Working with Floppy Disks

Page 32

Floppy Disks

Note:

Applicable only for units bundled with Slim Optical or Slim Floppy Drive Combo.

Working with Floppy Disks

Follow the instructions supplied by the vendor of the floppy disks.

Never clean the floppy disk drives with cleaning disks. Any attempt would destroy the read/ write head in the disk drive within 20 seconds.

1Insertion direction

2Label area

3Write protection switch for a 720 KB or a 1.44 MB floppy disk

4Identification of a 1.44 MB floppy disk or write protect switch on a 120 MB floppy disk

5Eject button for inserted floppy disks

6Disk is write-protected

7Disk is not write-protected

●To insert a floppy disk, push it into the drive in the insertion direction until it engages. The label should be facing upward.

●To remove the floppy disk, press the eject button (5).

The write-protect switch enables you to protect the data on the floppy disk from inadvertent overwriting or deletion.

●To protect the data on the floppy disk from being overwritten, push the write-protect switch to position (6). The hole is now visible.

●To remove write protection, push the switch to position (7). The hole is now covered.

Settings in BIOS Setup

The BIOS Setup menu allows you to set your hardware configuration and system functions. When the PC is delivered, the default entries are valid. You may customise these settings to your requirements in the BIOS Setup.

18

D5200_2(11-19)

18

12/7/06, 10:59 am

Image 32

Contents Esprimo D5200 User’s Manual Declaration of ConformityImportant Safety Instructions Class 1 Laser Products Using this Product for High-Safety Applications Before Reading this ManualFor Safe Operation Backing Up the DataUse of the software Microsoft Service PackSoftware License Agreement Temperature and humidity condition Keep the accompanying CD-ROMs in a safe placeNotational conventions Conventions Used in this ManualIntroduction Safety Important NotesManufacturer’s notes Energy savingFCC Class B Compliance Statement Transporting the PC Cleaning the PCCleaning the system unit and the monitor Disposal and recycling Disposal of the PC unit To institutional and corporate customersTo individual customers Disposal of the LCD unitXii Organization of This Manual Before Reading This ManualContents Steps for Initial Setup Unpacking and Checking the DeliveryExternal devices Drives and boardsSetting Up the PC Installing the FeetVertical positioning Horizontal positioning Point Connecting the keyboard Connecting the mouseConnecting standard keyboard Connect the Monitor, Mouse and KeyboardInitial Switch-on Software will be Installed Switching on monitor and PCDisconnecting cables Connecting External DevicesConnecting cables Connections on the system unit Connecting external devices to the serial port Connecting external devices to the parallel portSettings of the serial port Settings of the parallel portSwitching On the PC Switching Off the PCVent Power indicatorFront Panels of the Main Unit of the Personal Computer Disc access indicator CD access indicatorFloppy disk access indicator USB portsBack Panel of the Main Unit of the Personal Computer Main switch Mouse portKeyboard port Monitor portKeyboard Point Working with Floppy Disks Settings in Bios SetupFloppy Disks Check that the upper cover has been firmly installed Anti-theft Protection and Lead-sealingInternal power supply overloaded Installing New SoftwareMains voltage supply is faulty Screen stays blank No Mouse Pointer Displayed on the Screen Floppy Disk Cannot be Read or WrittenWrong monitor has been set under Window XP Wrong RAM modules have been insertedError Messages on the Screen Restoring the Hard Disk ContentsTime and/or Date is not Correct TipsSystem Expansion Information about BoardsInstall one peripheral device only at one time Before Connecting Peripheral DevicesPrecautions Do not disassemble the power unit Taking precautions to static electricityUse Acpi support peripheral devices Preparing screwdriversHow to remove the main unit cover Removing the Main Unit CoverInstalling Memory Table of combinations of memory Locations for memory to be installedMemory to be installed Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Locations for expansion cards to be installed Expansion cards to be installedInstalling expansion cards Press and raise the slot cover lock Remove the slot coverInstall the installing fitting Insert the expansion card into the portElectrical Data Point D5200533-39 12/7/06, 1100 am