Fujitsu D5200 user manual Insert the expansion card into the port, Install the installing fitting

Page 50

POINT

Store the removed slot cover in a safe place.

When using an expansion card after removed, install so that dust does not enter the internal personal computer.

7Insert the expansion card into the port.

Firmly insert the expansion card into the port and secure it by returning the lock raised in Step 4.

8Install the installing fitting.

Vertically install so that the tab is firmly positioned on the back side.

9Install the upper cover and connect LAN and modular cables.

10Insert the power plug into a wall outlet, and then turn on the computer.

The device driver and resource are automatically set so that the expansion card can be used.

POINT

Store the removed slot cover in a safe place. After removing an expansion card, reinstall the slot cover so that dust does not enter the internals of the computer.

36

D5200_5(33-39)

36

12/7/06, 11:00 am

Image 50

Contents Esprimo D5200 User’s Manual Declaration of ConformityImportant Safety Instructions Class 1 Laser Products For Safe Operation Using this Product for High-Safety ApplicationsBefore Reading this Manual Backing Up the DataUse of the software Microsoft Service PackSoftware License Agreement Temperature and humidity condition Keep the accompanying CD-ROMs in a safe placeNotational conventions Conventions Used in this ManualIntroduction Manufacturer’s notes SafetyImportant Notes Energy savingFCC Class B Compliance Statement Transporting the PC Cleaning the PCCleaning the system unit and the monitor To individual customers Disposal and recycling Disposal of the PC unitTo institutional and corporate customers Disposal of the LCD unitXii Organization of This Manual Before Reading This ManualContents External devices Steps for Initial SetupUnpacking and Checking the Delivery Drives and boardsSetting Up the PC Installing the FeetVertical positioning Horizontal positioning Point Connecting standard keyboard Connecting the keyboardConnecting the mouse Connect the Monitor, Mouse and KeyboardInitial Switch-on Software will be Installed Switching on monitor and PCDisconnecting cables Connecting External DevicesConnecting cables Connections on the system unit Settings of the serial port Connecting external devices to the serial portConnecting external devices to the parallel port Settings of the parallel portSwitching On the PC Switching Off the PCVent Power indicatorFront Panels of the Main Unit of the Personal Computer Floppy disk access indicator Disc access indicatorCD access indicator USB portsBack Panel of the Main Unit of the Personal Computer Keyboard port Main switchMouse port Monitor portKeyboard Point Working with Floppy Disks Settings in Bios SetupFloppy Disks Check that the upper cover has been firmly installed Anti-theft Protection and Lead-sealingInternal power supply overloaded Installing New SoftwareMains voltage supply is faulty Screen stays blank Wrong monitor has been set under Window XP No Mouse Pointer Displayed on the ScreenFloppy Disk Cannot be Read or Written Wrong RAM modules have been insertedTime and/or Date is not Correct Error Messages on the ScreenRestoring the Hard Disk Contents TipsSystem Expansion Information about BoardsInstall one peripheral device only at one time Before Connecting Peripheral DevicesPrecautions Use Acpi support peripheral devices Do not disassemble the power unitTaking precautions to static electricity Preparing screwdriversHow to remove the main unit cover Removing the Main Unit CoverInstalling Memory Table of combinations of memory Locations for memory to be installedMemory to be installed Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Locations for expansion cards to be installed Expansion cards to be installedInstalling expansion cards Press and raise the slot cover lock Remove the slot coverInstall the installing fitting Insert the expansion card into the portElectrical Data Point D5200533-39 12/7/06, 1100 am