Fujitsu D5200 user manual Point

Page 52

*1 : Some application may show the other name of this processor.

*2 : The capacity of the disk provided in this manual is calculated by that 1 MB=1000 x 1000 bytes and 1 GB=1000 x 1000 x 1000 bytes.

With the calculation that 1 MB=1024 x 1024 bytes and 1 GB=1024 x 1024 x 1024 bytes, the capacity actually displayed on Windows becomes less than the disk capacity described in this manual.

*3 : There is no guarantee that your adapter can carry out communication normally with any other USB support peripheral devices.

When USB 1.1 compliance peripheral devices are connected, they can be used by specifications for USB 1.1.

The max rating of USB devices is 500mA per port. Please see the manual with the USB devices.

*4 : To reduce energy consumption when powering-off, switch the main switch to the “” side, or unplug the power plug from the AC cable.

*5 : The power consumption is for system only, not including outlet devices.

*6 : Values differ depending on the device configuration you use.

*7 : Service Pack2 is applied at shipment.

POINT

Note that, for improvement, specifications for this personal computer are subject to change without notice.

38

D5200_5(33-39)

38

12/7/06, 11:00 am

Image 52

Contents Esprimo D5200 User’s Manual Declaration of ConformityImportant Safety Instructions Class 1 Laser Products Using this Product for High-Safety Applications Before Reading this ManualFor Safe Operation Backing Up the DataSoftware License Agreement Microsoft Service PackUse of the software Temperature and humidity condition Keep the accompanying CD-ROMs in a safe placeIntroduction Conventions Used in this ManualNotational conventions Safety Important NotesManufacturer’s notes Energy savingFCC Class B Compliance Statement Cleaning the system unit and the monitor Cleaning the PCTransporting the PC Disposal and recycling Disposal of the PC unit To institutional and corporate customersTo individual customers Disposal of the LCD unitXii Organization of This Manual Before Reading This ManualContents Steps for Initial Setup Unpacking and Checking the DeliveryExternal devices Drives and boardsSetting Up the PC Installing the FeetVertical positioning Horizontal positioning Point Connecting the keyboard Connecting the mouseConnecting standard keyboard Connect the Monitor, Mouse and KeyboardInitial Switch-on Software will be Installed Switching on monitor and PCConnecting cables Connecting External DevicesDisconnecting cables Connections on the system unit Connecting external devices to the serial port Connecting external devices to the parallel portSettings of the serial port Settings of the parallel portSwitching On the PC Switching Off the PCFront Panels of the Main Unit of the Personal Computer Power indicatorVent Disc access indicator CD access indicatorFloppy disk access indicator USB portsBack Panel of the Main Unit of the Personal Computer Main switch Mouse portKeyboard port Monitor portKeyboard Point Floppy Disks Settings in Bios SetupWorking with Floppy Disks Check that the upper cover has been firmly installed Anti-theft Protection and Lead-sealingMains voltage supply is faulty Installing New SoftwareInternal power supply overloaded Screen stays blank No Mouse Pointer Displayed on the Screen Floppy Disk Cannot be Read or WrittenWrong monitor has been set under Window XP Wrong RAM modules have been insertedError Messages on the Screen Restoring the Hard Disk ContentsTime and/or Date is not Correct TipsSystem Expansion Information about BoardsPrecautions Before Connecting Peripheral DevicesInstall one peripheral device only at one time Do not disassemble the power unit Taking precautions to static electricityUse Acpi support peripheral devices Preparing screwdriversHow to remove the main unit cover Removing the Main Unit CoverInstalling Memory Memory to be installed Locations for memory to be installedTable of combinations of memory Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Locations for expansion cards to be installed Expansion cards to be installedInstalling expansion cards Press and raise the slot cover lock Remove the slot coverInstall the installing fitting Insert the expansion card into the portElectrical Data Point D5200533-39 12/7/06, 1100 am