Fujitsu D5200 Unpacking and Checking the Delivery, Steps for Initial Setup, External devices

Page 15

Chapter 1 - Preparing for Use

CAUTION

Please take note of the safety information in the "Important notes" chapter.

■Unpacking and Checking the Delivery

It is recommended not to throw away the original packaging material! It may be required for reshipment at some later date.

●Unpack all the individual parts.

●Check the delivery for damage incurred during transportation.

●Check whether the delivery agrees with the details in the delivery note.

Should you discover that the delivery does not correspond to the delivery note, notify your local sales outlet immediately.

■Steps for Initial Setup

First-time setup includes the connection of the monitor, mouse and keyboard to the system unit and the setup of the supplied software.

External devices

If you have received other devices in addition to your PC (e.g. a printer or a modem), do not connect these until after the initial installation.

Drives and boards

If you have received drives or boards with your PC, please do not install them until after first-time setup. How to install drives and boards is described in the chapter "System expansions".

Perform the following steps in the prescribed order:

1.Decide where you are going to use the PC, and then set it up.

2.Connect the monitor, mouse and keyboard to the PC.

3.Check the rated voltage of the PC and connect it to the mains.

4.Switch on the PC and follow the instructions on the screen.

1

D5200_1(01-10)

1

12/7/06, 10:58 am

Image 15

Contents Declaration of Conformity Esprimo D5200 User’s ManualImportant Safety Instructions Class 1 Laser Products Backing Up the Data Using this Product for High-Safety ApplicationsBefore Reading this Manual For Safe OperationMicrosoft Service Pack Software License AgreementUse of the software Keep the accompanying CD-ROMs in a safe place Temperature and humidity conditionConventions Used in this Manual IntroductionNotational conventions Energy saving SafetyImportant Notes Manufacturer’s notesFCC Class B Compliance Statement Cleaning the PC Cleaning the system unit and the monitorTransporting the PC Disposal of the LCD unit Disposal and recycling Disposal of the PC unitTo institutional and corporate customers To individual customersXii Before Reading This Manual Organization of This ManualContents Drives and boards Steps for Initial SetupUnpacking and Checking the Delivery External devicesInstalling the Feet Setting Up the PCVertical positioning Horizontal positioning Point Connect the Monitor, Mouse and Keyboard Connecting the keyboardConnecting the mouse Connecting standard keyboardSwitching on monitor and PC Initial Switch-on Software will be InstalledConnecting External Devices Connecting cablesDisconnecting cables Connections on the system unit Settings of the parallel port Connecting external devices to the serial portConnecting external devices to the parallel port Settings of the serial portSwitching Off the PC Switching On the PCPower indicator Front Panels of the Main Unit of the Personal ComputerVent USB ports Disc access indicatorCD access indicator Floppy disk access indicatorBack Panel of the Main Unit of the Personal Computer Monitor port Main switchMouse port Keyboard portKeyboard Point Settings in Bios Setup Floppy DisksWorking with Floppy Disks Anti-theft Protection and Lead-sealing Check that the upper cover has been firmly installedInstalling New Software Mains voltage supply is faultyInternal power supply overloaded Screen stays blank Wrong RAM modules have been inserted No Mouse Pointer Displayed on the ScreenFloppy Disk Cannot be Read or Written Wrong monitor has been set under Window XPTips Error Messages on the ScreenRestoring the Hard Disk Contents Time and/or Date is not CorrectInformation about Boards System ExpansionBefore Connecting Peripheral Devices PrecautionsInstall one peripheral device only at one time Preparing screwdrivers Do not disassemble the power unitTaking precautions to static electricity Use Acpi support peripheral devicesRemoving the Main Unit Cover How to remove the main unit coverInstalling Memory Locations for memory to be installed Memory to be installedTable of combinations of memory Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Expansion cards to be installed Locations for expansion cards to be installedPress and raise the slot cover lock Remove the slot cover Installing expansion cardsInsert the expansion card into the port Install the installing fittingElectrical Data Point D5200533-39 12/7/06, 1100 am