Inova ICP-PII user manual Then the COM2 on the IDE carriers

Appendix B ICP-HD

®CompactPCI

Table B1.4 IPB-HDE8MS Connector Description

Connector	Description
J1	Standard Floppy Disk Connector - To Floppy Disk
J2	Standard IDE Connector - To Hard Disk / FLASH
J9, J10	Primary HD (Master / Slave)
J9a, J10A	Primary HD (Master / Slave)
J11	COM1, Mouse & Keyboard
J13	LPT1 & COM2
J13A	LPT1 & COM2*
J18	Slim-Line Floppy Disk Connector - To CPU Base Board
J18A	Slim-Line Floppy Disk Connector - To Floppy Disk

*If connectors 9 and 10 are connected to a Master device then 9a and 10a must be connected to a Slave.

Note:
* Tables B1.3 and B1.4 refer to J13
and J13a for the connection of COM2
and LPT1. Both the ICP-HD-1 and ICP-
	B
HDE8 possess COM2 which is accessed
through J13 connected to the CPU
board. If the Inova IPB-FPE12 piggy-
back is used and connected to J13a
then the COM2 on the IDE carriers
ICP-HD-1 and ICP-HDE8MS will be
disabled.

Note:

Damage to the CPU board or the

piggyback may result if the cables are incorrectly positioned. Inova will not accept responsibility for negligent actions!

CPUAppendix-B ©2001 Inova Computers GmbH PageB-5