Inova ICP-PII user manual A1.4 IPB-FPE8MS Theme Variation, Description

Page 62

IPB-FPE8

Appendix A

 

 

A1.4 IPB-FPE8MS (Theme Variation)

Figure A1.4 illustrates the construction of the IPB-FPE8MS - a variation of the IPB-FPE8 but with a number of extra features. The electrical connection to the CPU base board is still via the underside connector J11 and again, the precautions mentioned for the IPB-FPE8 are valid here.

Figure A1.4 Piggyback Interface IPB-FPE8MS

J9B

J18A

J18B

J10B

J9A

J10A

J11

Note that the IPB-FPE8 module does not allow a HD to be connected behind it and the lower 9- pin D-Sub slot may be used for remote connection of PanelLink for example. The IPB-FPE8MS shown in figure A1.4 enables connection of floppy, a CD-ROM and other peripherals. The connector names and descriptions are declared in table A1.4.

Table A1.4 IPB-FPE8MS Connector Description

Connector

Description

 

 

J9A, J10A

IDE Primary (Master or Slave)

J9B, J10B

IDE Primary (Master or Slave)*

 

 

J11

Mouse, Keyboard and COM1

J18A, J18B

Floppy Disk (either a standard slim-line floppy connector or flex cable)

 

 

* If connectors 9a and 10a are configured as Master then 9b and 10b must be Slave.

PageA-4

©2001 Inova Computers GmbH

CPUAppendix-A

Image 62
Contents ICP-PIII USA Contents PrefaceICP-PIII CompactPCI Backplane A1 IPB-FPE8 CPU Extension B1 IPM-ATA CPU Extension Unpacking and Special Handling Instructions ICP-PIIIPreface Revision History Revision HistoryThree Year Limited Warranty Overview Contents ICP-PIII Software InterfacingPeripherals GraphicsSpecifications Mobile PiiiCompactPCI Configuration CPU Family Processor CPU Speeds Multi-Processing PackageVGA VentureCom SoftwareLinux Windows36 OS-9 Windows CEVxWorks 37 QNXBlock Diagram HardwareDescription Connector LocationConnector Description Front-Panel Features Interface Description & Location44 Front-Panel Options Interface Positions 45 InterfacesConfiguration Con Tents ConfigurationICP-PIII Memory MapUMB Reservations for ISA Start Address Finish Address Port AddressingI/O Mapped Peripherals Address DescriptionMemory Mapped Peripherals Interrupt RoutingInterrupt Request Interrupt Vector Function/Assignment Inova Piii Device List Device Description PCI Interrupt Number RoutingInterrupt Configuration CompactPCIWatchdog Timer / CounterTimer Function/Assignment This page has been left blank intentionally Page2-10 Interfaces Contents InterfacesICP-PIII ICP-PIII Connector J1 and J2 CompactPCI J1/J2 ConnectorCompactPCI Connector Pin Nr Row a Row B Row C Row D Row E CompactPCI CLK6 GND CompactPCI CLK6 GND FWTPA+ Fwtpa HCS0# Rear I/O OptionCompactPCI Backplane 10 Inova’s 32-Bit CompactPCI 8-Slot Backplane RH System Slot 21 J7 & J12 Fast Ethernet Pin No SignalInterfaces 22 J17 VGA Interface Resolution 256 16.7M Pin No Signal 23 J16 PanelLink Interface24 J16 GigaSTAR Interface 24 GigaSTAR D-Sub Interface Pinout 11 GigaSTAR Interface25 USB Interface Pinout 25 USB Connector Signals 25 J19 USB Interface26 J15 FireWire Interface 26 FireWire Interface Pinout 26 FireWire Connector Signals29 J14 Flash Interface 28 J20 Reset Button27 J20 Infrared iRdA Interface 30 J18 Floppy Disk InterfaceConnecting the Piii to the Inova IPB-FPE8 31 CPU to IPB-FPE8 ConnectionConnecting the Piii to the Inova ICP-HD-1 CompactPCIConnecting the Piii to the Inova IPB-FPE12 33 CPU to IPB-FPE12 Connection34 CPU to IPB-FPE12 Connection Connecting the Piii to the ICP-FD-1 35 CPU to Slim-Line Floppy Disk ConnectionIPB-FPE8 A1.2 IPB-FPE8 & Front-panel 4HP or 8HP A1 IPB-FPE8 CPU ExtensionA1.1 J11 Interface for COM1, Mouse & Keyboard A1.3 Stand-Alone IPB-FPE8 Pin J11A1.4 IPB-FPE8MS Theme Variation DescriptionCompactPCI A1.5 IPB-FPE8MS DescriptionA1.6 Keyboard Interface A1.7 Mouse InterfaceCompactPCI A1.8 COM1 InterfaceThis page has been left blank intentionally PageA-8 ICP-HD B1.2 ICP-HD-1 & Front-panel 4HP or 8HP B1 ICP-HD CPU ExtensionB1.1 J11, J13 Interfaces B1.3 IDE Carrier Board ICP-HD-1 Figure B1.3 IDE Carrier Board ICP-HD1B1.4 ICP-HDE8MS Theme Variation Figure B1.4 IDE Carrier ICP-HDE8MSThen the COM2 on the IDE carriers B1.5 ICP-HDE8MS Description Figure B1.5 Top & Bottom Views of the ICP-HDE8MSB1.6 Keyboard Interface B1.7 Mouse InterfacePin No Signal RS232 B1.8 COM1 & COM 2 InterfacesIPM-ATA B1 IPM-ATA CPU Extension B1.1 J1 InterfacesB1.1 J1 Interfaces Contd KEYMaster Slave Compact FlashJumper J6 Master Jumper J7B1.4 IPM-ATA-PCMCIA Pcmcia Device in J5 Jumper J8 MasterB1.5 Device Compatibility Test Position Compact Flash Card Jumper ResultThis page has been left blank intentionally PageB-8 IPB-FPE12 C1.2 IPB-FPE12 & Front-panel 4HP or 12HP C1 IPB-FPE12 CPU ExtensionC1.1 J13 Interface for LPT1 & COM2 C1.3 LPT1 & COM2 Piggyback J13Table C1.3 IPB-FPE12 Connector Description C1.4 LPT1 Interface Figure C1.6 LPT1 Interface PinoutC1.5 COM2 Interface IPB-RIO Appendix D D1 IPB-RIO CPU ExtensionHard Disk J10 Hard Disk J9 D1.3 IPB-RIO-C-SHORT Rear I/O CD1.4 IPB-RIO-C-80MM This page has been left blank intentionally PageD-6