Inova ICP-PII user manual CompactPCI, A1.5 IPB-FPE8MS Description

Page 63

Appendix A

IPB-FPE8

 

 

®

A1.5 IPB-FPE8MS Description

As mentioned previously, the IPB-FPE8MS has a number of additional features compared to the standard IPB-FPE8 module. These extra features include HD and FD connection with both standard connectors and the Inova flex cables. This provides the user with system flexibility.

Figure A1.5 Top & Bottom Views of the IPB-FPE8MS

CompactPCI

Keyboard

 

Mouse

 

 

2

COM1

5

 

3

4

J11

A

PCB Cut-out: 1 DiskOnChip FLASH 2 For LPT1 Flex Cable

3 Flying Lead / Connector

4 Piggyback Flying Lead

5 IDE Flex-Cables [J9a, J10a] to CPU

Note:

Damage to the CPU board or the

piggyback may result if the cables are incorrectly positioned. Inova will not accept responsibility for negligent actions!

Figure A1.5 makes reference to two standard PC-style connectors (J5 and J6). The function of these connectors is given in table A1.5.

Table A1.5 Standard Hard-Disk & Floppy Disk Connectors

 

Connector

Description

 

 

 

 

 

 

J5

PC-Style Floppy Disk Connector

 

 

J6

Standard Primary IDE Connector (Master or Slave)

 

 

 

 

 

 

 

 

 

 

 

 

 

CPUAppendix-A

©2001 Inova Computers GmbH

PageA-5

Image 63
Contents ICP-PIII USA Contents PrefaceICP-PIII CompactPCI Backplane A1 IPB-FPE8 CPU Extension B1 IPM-ATA CPU Extension Unpacking and Special Handling Instructions Revision History ICP-PIIIPreface Revision HistoryThree Year Limited Warranty Overview Contents ICP-PIII Graphics InterfacingPeripherals SoftwareMobile Piii SpecificationsCompactPCI CPU Family Processor CPU Speeds Multi-Processing Package ConfigurationVGA Windows SoftwareLinux VentureCom37 QNX Windows CEVxWorks 36 OS-9Hardware Block DiagramConnector Location Connector DescriptionDescription Interface Description & Location Front-Panel Features44 Front-Panel Options 45 Interfaces Interface PositionsConfiguration Con Tents Memory Map ConfigurationICP-PIIIPort Addressing UMB Reservations for ISA Start Address Finish AddressAddress Description I/O Mapped PeripheralsInterrupt Routing Memory Mapped PeripheralsInterrupt Request Interrupt Vector Function/Assignment Device Description PCI Interrupt Number Routing Inova Piii Device ListCompactPCI Interrupt ConfigurationTimer / Counter Timer Function/AssignmentWatchdog This page has been left blank intentionally Page2-10 Interfaces Contents InterfacesICP-PIII CompactPCI J1/J2 Connector CompactPCI ConnectorICP-PIII Connector J1 and J2 Pin Nr Row a Row B Row C Row D Row E CompactPCI CLK6 GND CompactPCI CLK6 GND FWTPA+ Fwtpa HCS0# Option Rear I/OCompactPCI Backplane 10 Inova’s 32-Bit CompactPCI 8-Slot Backplane RH System Slot Pin No Signal Interfaces21 J7 & J12 Fast Ethernet 22 J17 VGA Interface Resolution 256 16.7M 23 J16 PanelLink Interface Pin No Signal24 GigaSTAR D-Sub Interface Pinout 11 GigaSTAR Interface 24 J16 GigaSTAR Interface25 J19 USB Interface 25 USB Interface Pinout 25 USB Connector Signals26 FireWire Interface Pinout 26 FireWire Connector Signals 26 J15 FireWire Interface30 J18 Floppy Disk Interface 28 J20 Reset Button27 J20 Infrared iRdA Interface 29 J14 Flash Interface31 CPU to IPB-FPE8 Connection Connecting the Piii to the Inova IPB-FPE8CompactPCI Connecting the Piii to the Inova ICP-HD-133 CPU to IPB-FPE12 Connection Connecting the Piii to the Inova IPB-FPE1234 CPU to IPB-FPE12 Connection 35 CPU to Slim-Line Floppy Disk Connection Connecting the Piii to the ICP-FD-1IPB-FPE8 A1 IPB-FPE8 CPU Extension A1.1 J11 Interface for COM1, Mouse & KeyboardA1.2 IPB-FPE8 & Front-panel 4HP or 8HP Pin J11 A1.3 Stand-Alone IPB-FPE8Description A1.4 IPB-FPE8MS Theme VariationA1.5 IPB-FPE8MS Description CompactPCIA1.7 Mouse Interface A1.6 Keyboard InterfaceA1.8 COM1 Interface CompactPCIThis page has been left blank intentionally PageA-8 ICP-HD B1 ICP-HD CPU Extension B1.1 J11, J13 InterfacesB1.2 ICP-HD-1 & Front-panel 4HP or 8HP Figure B1.3 IDE Carrier Board ICP-HD1 B1.3 IDE Carrier Board ICP-HD-1Figure B1.4 IDE Carrier ICP-HDE8MS B1.4 ICP-HDE8MS Theme VariationThen the COM2 on the IDE carriers Figure B1.5 Top & Bottom Views of the ICP-HDE8MS B1.5 ICP-HDE8MS DescriptionB1.7 Mouse Interface B1.6 Keyboard InterfaceB1.8 COM1 & COM 2 Interfaces Pin No Signal RS232IPM-ATA B1.1 J1 Interfaces B1 IPM-ATA CPU ExtensionKEY B1.1 J1 Interfaces ContdCompact Flash Jumper J6Master Slave Jumper J7 MasterPcmcia Device in J5 Jumper J8 Master B1.4 IPM-ATA-PCMCIATest Position Compact Flash Card Jumper Result B1.5 Device CompatibilityThis page has been left blank intentionally PageB-8 IPB-FPE12 C1 IPB-FPE12 CPU Extension C1.1 J13 Interface for LPT1 & COM2C1.2 IPB-FPE12 & Front-panel 4HP or 12HP J13 C1.3 LPT1 & COM2 PiggybackTable C1.3 IPB-FPE12 Connector Description Figure C1.6 LPT1 Interface Pinout C1.4 LPT1 InterfaceC1.5 COM2 Interface IPB-RIO D1 IPB-RIO CPU Extension Appendix DHard Disk J10 Hard Disk J9 Rear I/O C D1.3 IPB-RIO-C-SHORTD1.4 IPB-RIO-C-80MM This page has been left blank intentionally PageD-6