Inova ICP-PII user manual CompactPCI

Page 15

ICP-PIII

Product Overview

 

 

®CompactPCI

PCI/PCI

Intel 21150 transparent bridge (Master) or Intel 21554 non-transpar-

 

ent PCI/PCI bridge for multiprocessing (Slave) operation with Basic

 

Hot-Swap support (PICMG 2.1 R1.0), Serialized interrupts and univer-

 

sal (3.3/5.0V) V I/O support

On-Board I/O

A 10/100 MBit/s Ethernet (Intel 82559)

 

A

optional 2nd independent Fast Ethernet

 

A

Up to 2x 12Mbit/s USB

 

A

Up to 2x 400Mbit/s FireWire interfaces

Rear I/O

Standard to all CPU variants is option ‘C’ which provides 2nd FireWire

 

channel, 2nd USB channel, LPT1 (Floppy), EIDE and loudspeaker.

 

Other I/O configurations including customized are possible.

Mass Storage

1.44MByte 3.5” floppy drive and EIDE (flex cable/rear I/O) support-

 

ing 2 pairs (Master/Slave) hard-disks or CD ROMs

Front-Panels

Optional 4TE front-panel extension provides:

 

COM1, COM2, keyboard, PS-2 mouse

 

Extended front-panel (4TE) provides:

 

COM2, LPT1

Connectors

USB (USB), RJ45 (Ethernet), 6-pin FireWire (FireWire), 15-pin D-Sub

 

(PanelLink), 15-pin high-density D-Sub (VGA), 9-pin D-Sub

 

(GigaST)R)

CompactPCI

PICMG 2.0 R3.0, 32-bit, 33MHz system slot interface with 7 Master

 

(DMA) support. Dual-slot operation

Mechanics

3U (100 x 160 x 21mm) 4 TE

 

3U (100 x 160 x 42mm) 8 TE

 

3U (100 x 160 x 63mm) 12 TE

Power Cons.

25W typ. PIII @ 850MHz (Lynx)

 

21W typ. PIII @ 700MHz (Lynx)

 

12W typ. Mobile PIII @ 500MHz (Lynx)

Software

Windows® NT®, Windows® 2000, Windows® 9x, Linux,

Support

VxWorks®, QNX®

Mass

220g (4TE)

Oper. Temp.

0°C to +60°C (Ambient)*

Storage Temp.

-40°C to +85°C (400MHz Mobile [Lynx] only)

Extended Temp.

-40 to +85°C (Seleted CPUs only)

Humidity

5% to 95% (non-condensing)

Warranty

Three-year limited warranty

Conformance

PICMG 2.0 R3.0

 

CE

1

*Note: Any CPU fitted with HD, FD or CD-ROM etc. has a max. operational temperature of 50

°C

CPUs without HD or PC inter faces ar e single-slot (4TE) for ‘pr ocessor speeds 700MHz.

Mobile processors are passively cooled - installation

MUSThave >0.3m/s air flow!

 

Doc. PD00581013.004

©2002 Inova Computers GmbH

Page1-5

Image 15
Contents ICP-PIII USA Contents PrefaceICP-PIII CompactPCI Backplane A1 IPB-FPE8 CPU Extension B1 IPM-ATA CPU Extension Unpacking and Special Handling Instructions Revision History ICP-PIIIPreface Revision HistoryThree Year Limited Warranty Overview Contents ICP-PIII Graphics InterfacingPeripherals SoftwareMobile Piii SpecificationsCompactPCI CPU Family Processor CPU Speeds Multi-Processing Package ConfigurationVGA Windows SoftwareLinux VentureCom37 QNX Windows CEVxWorks 36 OS-9Hardware Block DiagramConnector Location Connector DescriptionDescription Interface Description & Location Front-Panel Features44 Front-Panel Options 45 Interfaces Interface PositionsConfiguration Con Tents Memory Map ConfigurationICP-PIIIPort Addressing UMB Reservations for ISA Start Address Finish AddressAddress Description I/O Mapped PeripheralsInterrupt Routing Memory Mapped PeripheralsInterrupt Request Interrupt Vector Function/Assignment Device Description PCI Interrupt Number Routing Inova Piii Device ListCompactPCI Interrupt ConfigurationTimer / Counter Timer Function/AssignmentWatchdog This page has been left blank intentionally Page2-10 Interfaces Contents InterfacesICP-PIII CompactPCI J1/J2 Connector CompactPCI ConnectorICP-PIII Connector J1 and J2 Pin Nr Row a Row B Row C Row D Row E CompactPCI CLK6 GND CompactPCI CLK6 GND FWTPA+ Fwtpa HCS0# Option Rear I/OCompactPCI Backplane 10 Inova’s 32-Bit CompactPCI 8-Slot Backplane RH System Slot Pin No Signal Interfaces21 J7 & J12 Fast Ethernet 22 J17 VGA Interface Resolution 256 16.7M 23 J16 PanelLink Interface Pin No Signal24 GigaSTAR D-Sub Interface Pinout 11 GigaSTAR Interface 24 J16 GigaSTAR Interface25 J19 USB Interface 25 USB Interface Pinout 25 USB Connector Signals26 FireWire Interface Pinout 26 FireWire Connector Signals 26 J15 FireWire Interface30 J18 Floppy Disk Interface 28 J20 Reset Button27 J20 Infrared iRdA Interface 29 J14 Flash Interface31 CPU to IPB-FPE8 Connection Connecting the Piii to the Inova IPB-FPE8CompactPCI Connecting the Piii to the Inova ICP-HD-133 CPU to IPB-FPE12 Connection Connecting the Piii to the Inova IPB-FPE1234 CPU to IPB-FPE12 Connection 35 CPU to Slim-Line Floppy Disk Connection Connecting the Piii to the ICP-FD-1IPB-FPE8 A1 IPB-FPE8 CPU Extension A1.1 J11 Interface for COM1, Mouse & KeyboardA1.2 IPB-FPE8 & Front-panel 4HP or 8HP Pin J11 A1.3 Stand-Alone IPB-FPE8Description A1.4 IPB-FPE8MS Theme VariationA1.5 IPB-FPE8MS Description CompactPCIA1.7 Mouse Interface A1.6 Keyboard InterfaceA1.8 COM1 Interface CompactPCIThis page has been left blank intentionally PageA-8 ICP-HD B1 ICP-HD CPU Extension B1.1 J11, J13 InterfacesB1.2 ICP-HD-1 & Front-panel 4HP or 8HP Figure B1.3 IDE Carrier Board ICP-HD1 B1.3 IDE Carrier Board ICP-HD-1Figure B1.4 IDE Carrier ICP-HDE8MS B1.4 ICP-HDE8MS Theme VariationThen the COM2 on the IDE carriers Figure B1.5 Top & Bottom Views of the ICP-HDE8MS B1.5 ICP-HDE8MS DescriptionB1.7 Mouse Interface B1.6 Keyboard InterfaceB1.8 COM1 & COM 2 Interfaces Pin No Signal RS232IPM-ATA B1.1 J1 Interfaces B1 IPM-ATA CPU ExtensionKEY B1.1 J1 Interfaces ContdCompact Flash Jumper J6Master Slave Jumper J7 MasterPcmcia Device in J5 Jumper J8 Master B1.4 IPM-ATA-PCMCIATest Position Compact Flash Card Jumper Result B1.5 Device CompatibilityThis page has been left blank intentionally PageB-8 IPB-FPE12 C1 IPB-FPE12 CPU Extension C1.1 J13 Interface for LPT1 & COM2C1.2 IPB-FPE12 & Front-panel 4HP or 12HP J13 C1.3 LPT1 & COM2 PiggybackTable C1.3 IPB-FPE12 Connector Description Figure C1.6 LPT1 Interface Pinout C1.4 LPT1 InterfaceC1.5 COM2 Interface IPB-RIO D1 IPB-RIO CPU Extension Appendix DHard Disk J10 Hard Disk J9 Rear I/O C D1.3 IPB-RIO-C-SHORTD1.4 IPB-RIO-C-80MM This page has been left blank intentionally PageD-6