B1.4 IPM-ATA-PCMCIA
The IPM-ATA-PCMCIA has provision for one standard ATA PCMCIA device and one Compact FLASH or MicroDrive site. Figure B1.4 illustrates the significant connectors for this device while Table B1.4 indicates the jumper settings for the various Master/Slave device configurations.
Figure B1.4 IPM-ATA-PCMCIA Board Layout
1
2
3
Table B1.4 IPM-ATA-PCMCIA Jumper Description
PCMCIA Device in J5 | Jumper J8 |
| |
Master | Slave | |
| | |
X | - | 2-3 |
- | X | Open |
| | |
- | - | - |
| | |
Compact FLASH | |
or MicroDrive in J3 | Jumper J6 |
Master | Slave | |
| | |
X | - | 2-3 |
- | X | Open |
| | |
- | - | - |
| | |
It should be noted that the secondary IDE channel only is available for use by the IPB-ATA-PCMCIA (the primary is on the CPU board itself). A Master device must be present either in the form of an external hard-disk, PCMCIA device, Compact FLASH, MicroDrive or CD-ROM etc. Slave only con- figurations and multi Master configurations are not supported and will not work!
PageB-6 | ©2001 Inova Computers GmbH | CPUAppendix-B |
