Inova ICP-PII user manual A1.3 Stand-Alone IPB-FPE8, Pin J11

Appendix A IPB-FPE8

®CompactPCI

A1.3 Stand-Alone IPB-FPE8

Figure A1.3 illustrates the construction of the stand-alone IPB-FPE8 piggyback and the underside location of the J11 connector. Care should be taken to ensure that pin 1 of J11 on the CPU base board is linked by an appropriate length of flex cable to pin 1 on the piggyback. To help with the orientation, the connector flanks that are blue indicate the blue face of the flex-cable. Unmarked flanks indicate the metallic connection of the flex-cable. Also, pin 1 has been highlighted by a red triangle.

Note:

Damage to the CPU board or the

piggyback may result if the flex cable is positioned incorrectly. Inova will not accept responsibility for negligent actions!

Figure A1.3 Stand-Alone Piggyback Interface IPB-FPE8

Pin 1

J11

A

Note:

The physical connection of the IPB- FPE8 is electrically identical regardless of the nature of connection (stand- alone or integrated!)

CPUAppendix-A ©2001 Inova Computers GmbH PageA-3