Inova ICP-PII B1.5 Device Compatibility, Test Position Compact Flash Card Jumper Result

Appendix B IPM-ATA

®CompactPCI

B1.5 Device Compatibility

Because of the diversity of Compact FLASH devices available with different architectures and error recovery routines etc. there is a strong possibility that some Master / Slave combinations will fail to be recognised by the BIOS. To help highlight the problem, Inova have provided the test report shown in Table B1.5 which should be regarded as a guide when choosing to pick-and-mix de- vices. Should devices other than those from the manufacturers indicated in the table be chosen, then it may be prudent that Inova be contacted prior to commissioning.

Table B1.5 Compatibility List

Test	Position	Compact FLASH Card	Jumper	Result
1	J3	IBM Microdrive DMDM-10340	Master	Windows NT4.0 Passed
	J4	Empty	-
2	J3	M-Systems 64MByte Compact FLASH	Master	Windows NT4.0 Passed
	J4	Empty	-
3	J3	IBM Microdrive DMDM-10340	Slave	Windows NT4.0 Passed
	J4	IBM Microdrive DMDM-10340	Master	(incl. Strip Set Config.)
4	J3	IBM Microdrive DMDM-10340	Slave	Windows NT4.0 Passed
	J4	M-Systems 64MByte Compact FLASH	Master
5	J3	IBM Microdrive DMDM-10340	Master	Failed: M-Systems not
	J4	M-Systems 64MByte Compact FLASH	Slave	detected in BIOS	B
6	J3	M-Systems 64MByte Compact FLASH	Master	Windows NT4.0 Passed
	J4	IBM Microdrive DMDM-10340	Slave

CPUAppendix-B ©2001 Inova Computers GmbH PageB-7