Cisco Systems IE200016TCB, IE20004TSB, IE20004TSL Figure C-3 Connecting the USB-Mini Console Cable

Appendix C Configuring the Switch with the CLI-Based Setup Program

Accessing the CLI Through the Console Port

USB Mini-Type B Console Port

Step 1 If you are connecting the switch USB-mini console port to a Windows-based PC for the first time, install a USB driver. See Figure C-3and the following sections for more information.

•“Installing the Cisco Microsoft Windows XP USB Driver” section on page C-5

•“Installing the Cisco Microsoft Windows 2000 USB Driver” section on page C-6

•“Installing the Cisco Microsoft Windows Vista and Windows 7 USB Driver” section on page C-6

Figure C-3 Connecting the USB-Mini Console Cable

1

2

16TC

0.5-3.0A

1

2

331554

3

1

2

USB-mini console port 3 USB port on the PC

USB cable

Step 2 Connect an USB cable to the PC USB port. Connect the other end of the cable to the switch mini-B (5-pin-connector) USB-mini console port. See Figure C-3.

Step 3 Identify the COM port assigned to the USB-mini console port:

Cisco IE 2000 Switch Hardware Installation Guide

C-4 OL-25818-04