Cisco Systems IE200016TCB manual Connecting to a Dual-Purpose Port Verifying Switch Operation

Contents

	Wiring the Protective Ground and DC Power for Alarm Circuits 2-34
	Wiring the External Alarms			2-35
	Attaching the Alarm Connector to the Switch				2-38
	Connecting Destination Ports			2-39
	Connecting to 10/100 and 10/100/1000 Ports 2-40
	Installing and Removing SFP Modules 2-42
	Installing SFP Modules into SFP Module Slots				2-42
	Removing SFP Modules from SFP Module Slots				2-43
	Connecting to SFP Modules			2-44
	Connecting to a Dual-Purpose Port 2-46
	Verifying Switch Operation 2-47
	Where to Go Next	2-47
	Troubleshooting 3-1
C H A P T E R 3
	Diagnosing Problems		3-1
	Switch Boot Fast		3-1
	Switch LEDs	3-2

		Switch Connections		3-2
		Bad or Damaged Cable			3-2
		Ethernet and Fiber-Optic Cables				3-2
		Link Status 3-2
		10/100 and 10/100/1000 Port Connections					3-3
		SFP Module	3-3
		Interface Settings		3-3
		Ping End Device		3-3
		Spanning Tree Loops 3-3
		Switch Performance		3-4
		Speed, Duplex, and Autonegotiation 3-4
		Autonegotiation and Network Interface Cards					3-4
		Cabling Distance		3-4
		Resetting the Switch	3-5
		How to Recover Passwords		3-5
		Finding the Switch Serial Number			3-6
		Technical Specifications
A P P E N D I X A			A-1
		Operating Temperature Specifications				A-1
		Technical Specifications		A-2
		Alarm Ratings A-6
						Cisco IE 2000 Switch Hardware Installation Guide
	OL-25818-04							v