Cisco Systems SFS 3012R manual Positioning and Sliding the Chassis onto the Shelf

Chapter 2 Installing and Booting the Cisco SFS 3012R Server Switch

Mounting the Cisco SFS 3012R Server Switch on a Rack

e.Secure the shelf end to the post with four screws (not included) that fit your rack, but do not tighten the screws.

Note When you install the shelf assembly, do not fully tighten the screws at the cable end of the shelf. When you slide the chassis onto the shelf, you might need to reposition the shelf to align the holes in the rack-mounting brackets with the rack holes.

f.Secure the extension brackets to the shelf with the screws provided. The screw heads must face inside the shelf.

Step 5 Slide the Cisco SFS 3012R Server Switch onto the shelf, as shown in Figure 2-3. Engage the shelf rails with the shelf guides, and continue sliding the chassis until the rack-mounting brackets on the chassis make contact with the rack posts.

Figure 2-3 Positioning and Sliding the Chassis onto the Shelf

2

180735

1

1

Shelf rail

2

Shelf guide

Step 6 Adjust the cable end of the shelf that you left loose in Step 4 so that the holes in rack-mounting brackets align with the holes in the rack.

Cisco SFS 3012R Multifabric Server Switch Hardware Installation Guide

2-6 OL-11187-01