Chapter 2 Installing and Booting the Cisco SFS 3012R Server Switch
Connecting InfiniBand Hosts
Figure 2-5 InfiniBand Cable with Pinch Connector
10
144960
Figure 2-6 InfiniBand Cable with Pull Connector
12
144961
Note If your host does not provide enough free space around a given InfiniBand port, verify that your InfiniBand cable connector engages fully. Wiggle your connector back and forth to be sure that both sides of the connector have locked firmly into place.
To remove a cable with a pinch connector, pinch both sides of the back of the connector, as shown in Figure
|
| Cisco SFS 3012R Multifabric Server Switch Hardware Installation Guide |
|
| |
|
|
| |||
|
|
|
| ||
|
|
|
|