CConfig port — This
DEnter button — The Enter button has three primary functions:
•• Saves changes that you make on the front panel.
•• Indicates that a potential tie has been created but not saved.
•• Indicates that a global preset has been selected to be saved or recalled but the preset action has not been accomplished.
EPreset button — The Preset button has two primary functions:
•• Places the switcher in preset saving mode to save a configuration as a preset, and in preset recalling mode to activate a
•• Indicates when preset saving mode is active (blinks) and when preset recalling mode is active (lights steadily).
FView < button — The View < button has two primary functions:
•• Places the switcher in
•• Indicates that the DXP is in
GEsc > button — The Esc > button has two primary functions:
•• Cancels operations or selections in progress and resets the front panel button indicators.
NOTE: The Esc > button does not reset the current 
configuration or any presets.
•• Indicates that the escape function has been activated (flashes once).
HVideo button — The Video button has one primary function:
Selects and deselects video for a configuration that is being created or viewed. It lights green to indicate that video is available for configuring or for viewing.
IAudio button — The Audio button has one primary function:
Selects and deselects audio for a configuration that is being created or viewed. It lights red to indicate that audio is available for configuring or for viewing.