Extron electronic 68-1370-50 REV. C, DXP HDMI setup guide Operations, Creating a Tie

Operations

Creating a Tie

To tie an input to an output:

1.Press and release the Esc button to clear any input button, output button, or control button indicators that may be lit.

2.Press and release the Video and Audio I/O buttons to select or deselect video and audio as desired.

I / O

Green when selected	VIDEO	AUDIO	Red when selected
Off when deselected			Off when deselected

Figure 11. Audio and Video I/O Buttons

NOTE: Audio or video can be broken away (selected, not tied) by pressing only the Video or only the Audio button.

3.Press and release the desired input button.

The button lights to indicate the selection.

5

Figure 12. Select an Input for the Tie

4.Press and release the desired output buttons.

Amber indicates a video and audio tie.

Green indicates a video-only tie.

Red indicates an audio-only tie.

3 4 8

ENTER

Green indicates the need to confirm the change.

Figure 13. Select an Output for the Tie

5.Press and release the Enter button. All button indicators turn off.

DXP DVI Pro and DXP HDMI Series • Operation 15