Extron electronic DXP HDMI, 68-1370-50 REV. C setup guide X1X1X1&X1*X$, IpiX3, IpsX3, IP Setup

30 DXP DVI Pro and DXP HDMI Series • Remote Control

Command Function	ASCII Command	Response	Additional Description
	(Host to Switcher)	(Switcher to Host)
Information Requests (Continued)
Query controller firmware version	Q	X2!]
Example:	Q	1.23]	The factory-installed controller firmware
			version is 1.23 (sample value only).
Request system status	S	X1^•X1^•X1&•X1*•X$]
			Display voltages X1^, internal temperature
			X1&, fan speed X1*, and power supply
			status X$. For X$: 0 = not OK, 1 = OK
Example:	S	3.29•4.85•+077.00•03750•1]
			Internal
		3.3 V Power System at 3.29	Temperature	Power supply is on and ok.
		3.29 • 4.85 • +077.00 • 03750 • 1
		5 V Power System at 4.85 V		Fan 1 rotating at 3750 RPM
IP Setup
Set IP address	EX3^CI}	IpiX3^]
Read IP address	ECI}	X3^]
Set subnet mask	EX3^CS}	IpsX3^]
Read subnet mask	ECS}	X3^]

NOTE: X$ = Mute status for individual output	0 = unmuted	1 = muted
X1^ = Voltage
X1& = Internal temperature in degrees F
X1* = Fan speed in RPM

X2!	= Firmware version number to second decimal place (n.nn)
X3^	= IP or Gateway address or subnet mask nnn.nnn.nnn.nnn