Extron electronic DXP HDMI Starting the Program, Matrix Switchers Control Program Install Link

3.Scroll to the Matrix Switchers Control Program and click Install.

Figure 21. Matrix Switchers Control Program Install Link

4.Follow the on-screen instructions. The installation program creates a C:\Program Files\Extron\Matrix_Switchers directory and an “Extron Electronics\Matrix Switchers” group folder. It installs the following four programs:

•• MATRIX Switcher + Control Program

•• MATRIX Switcher + Help

•• Uninstall MATRIX Switcher

•• Check for Matrix Updates

Starting the Program

1.To run the Matrix Switcher program, click Start >

All Programs > Extron Electronics > Matrix Switchers > MATRIX Switcher + Control Pgm. The Comm Port Selection window appears.

Figure 22. Comm Port Selection Screen

2.Select the Comm (serial) port that is connected to the switcher or select IP [LAN].

3.If you selected a Comm port, check the baud rate (shown in green above the ports list). If you need to change it, click the Baud button and double-click the desired baud rate option on the drop-down menu that opens.

34DXP DVI Pro and DXP HDMI Series • Remote Control