Extron electronic 68-1370-50 REV. C Command and Response Table for SIS Commands, @*X#%, @*X#$

Command and Response Table for SIS Commands

NOTE: The following table is a partial list of SIS commands. For a complete listing, see the DXP DVI Pro and DXP HDMI Series User Guide, "SIS Configuration and Control" section.

Command Function	ASCII Command	Response	Additional Description
	(Host to Switcher)	(Switcher to Host)

Output Switching

NOTES: Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*8$.

DXP	•	The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003%).
	•	The & tie (output switching) command for RGB and the % tie command for video can be used interchangeably.
	•	The & view ties command for RGB and the % view ties command for video can be used interchangeably.
DVI
	Tie input X@ to output X#, video and		X@*X#!	OutX#•InX@•All]	Tie video and audio of input X@ to output
Pro
	audio				X#.
and
	Example		1*3!	Out3•In1•All]	Tie input 1 video and audio to output 3.
DXP
	Tie input X@ to output X#, RGB only		X@*X#&	OutX#•InX@•RGB]	Video breakaway
HDMI
	Example		8*4&	Out4•In8•RGB]	Tie input 8 RGB to output 4.
	(See second note, above.)
Series •
	Tie input X@ to output X#, video only		X@*X#%	OutX#•InX@•Vid]	Video breakaway
	Example		7*5%	Out5•In7•Vid]	Tie input 7 video to output 5.
Remote	(See second note, above.)
	Tie input X@ to output X#, audio only		X@*X#$	OutX#•InX@•Aud]	Audio breakaway
	Example:		6*4$	Out4•In6•Aud]	Tie input 6 audio to output 4.
Control
	NOTE: X@ = Input number		0 – maximum number of inputs for your model (0 = untied)
25	X# = Output number		1 – maximum number of outputs for your model