28 DXP DVI Pro and DXP HDMI Series • Remote
Command Function | ASCII Command | Response | Additional Description | |
(Host to Switcher) | (Switcher to Host) | |||
|
| |||
Save and Recall Presets |
|
|
| |
NOTE: If you try to recall a preset that is not saved, the matrix switcher responds with the error code E11. | ||||
Save current configuration as a global | X&, | SprX&] | Save global preset X&. | |
preset |
|
| Command character is a comma. | |
Example: | 9, | Spr09] | Save current set of ties as preset 9. | |
Recall a global preset | X&. | RprX&] | Command character is a period. | |
Example: | 5. | Rpr05] | Recall preset 5, which becomes the current | |
|
|
| configuration. | |
Front Panel Lock (Executive) Modes
NOTE: See “Locking and Unlocking the Front Panel (Executive Modes)” in the "Operation" section for more on the lock modes.
Control
Lock all front panel functions | 1X |
Lock advanced front panel functions | 2X |
Unlock all front panel functions | 0X |
View lock status (executive mode) | X |
Exe1] | Enable lock mode 1. |
Exe2] | Enable lock mode 2. |
Exe0] | Enable lock mode 0. |
X$] | Display current lock mode X$. |
EDID (Extended Display Identification Data) Commands
Assign EDID data to an input | E A X!*X1(EDID} | EdidAX!*X1(] |
Assign EDID data to all inputs | E A X1(*EDID} | EdidA00*X1(] |
Assign EDID file X1( to input X!.
Assign EDID information files to all inputs. See the EDID Reference Table on page 24 for a list of values contained in each EDID file.
NOTE: X! = Input number | 1 | – maximum number of inputs for your model |
| ||
X$ = Current front panel lock mode | 0 | = unlocked | 1 = all front panel functions locked | 2 = basic functions unlocked | |
X& = Global preset number | 01 | – 32 |
|
| |
X1( = EDID file reference number | 01 | – 40 (32 = default 720p @ 60 Hz) |
| ||