Command Function | ASCII Command | Response | Additional Description | |
(Host to Switcher) | (Switcher to Host) | |||
|
| |||
|
|
|
| |
|
|
|
| |
Video and Audio Mute |
|
|
|
DXP DVI Pro and DXP HDMI Series
Video mute | X#*1B |
Video unmute | X#*0B |
View individual output mute | X#B |
Global Video mute | 1*B |
Global Video unmute | 0*B |
Audio mute | X#*1Z |
Audio unmute | X#*0Z |
View audio mute | X#Z |
Global audio mute | 1*Z |
Global audio unmute | 0*Z |
View all output mutes | EVM} |
Example: | EVM} |
DXP 88 HDMI |
|
VmtX#*1]
VmtX#*0]
X$]
Vmt1]
Vmt0]
AmtX#*1]
AmtX#*0]
X$]
Amt1]
Amt0]
X(1 X(2. . . X(n]
Mut02202000]
Mute output X# (video off). Unmute output X# (video on).
View video mute status for output X#. For X$: 0 = unmuted, 1 = muted Mute all video outputs.
Unmute all video outputs.
Mute output X# audio (audio off). Unmute output X# audio (audio on). View audio mute status for output X#. Mute all audio outputs.
Unmute all audio outputs.
Each X( response is the mute status of an output, starting from output 1.
n = the maximum number of outputs.
Audio for output 2, 3, and 5 is muted. Audio for all other outputs is unmuted.
• Remote Control 27
NOTE: The "Mut" portion of the response appears only when the switcher is in verbose mode 2 or 3 (see the Set verbose mode 
command under "IP Setup Commands," on page 31).
NOTE: X# = Output number | 1 | – (maximum number of outputs for your model) | ||
X$ = Mute status for individual output | 0 | = unmuted | 1 | = muted |
X( = Mute status for all outputs (VM) | 0 | = no mutes | 1 | = video mute 2 = audio mute 3 = video and audio mute |