ATTO Technology SC 5700 Install the FastStream Storage Controller, Installing the FastStream

Page 14

2.0 Install the FastStream Storage Controller

If you have not already completed the instructions on the Quick Start page packed with your FastStream, use the following instructions to install the FastStream.

Unpacking the packing box; verifying contents

•The FastStream. Note the serial number of your FastStream unit: ________________________

•Power cord

•Brackets and screws for mounting in a 19” rack

•Ethernet cable

•RS 232 cable

•CD which includes the Firmware, Installation and Operation Manual, QuickNAV™ IP discovery program and system drivers

Installing the FastStream

Exhibit 2.0-1 and Exhibit 2.0-2 on page 10 illustrate this procedure.

1Place the FastStream on a stable flat surface or install it into a standard rack.

If installing into a rack:

a.Attach the brackets to both sides of the FastStream enclosure.

b.Install the FastStream assembly horizontally within the rack so it does not reduce the air flow within the rack.

2Connect the host computer to Fibre Channel ports using SFPs and multimode fiber optic cables.

• FastStream 5700, connect cables to FC ports 1 and 2.

3Connect target devices to the FastStream.

• FastStream 5300: SCSI devices

• FastStream 5500: SAS/SATA devices

• FastStream 5700: Fibre Channel devices to ports 3 and 4

4Power up the target devices.

5Connect the Ethernet port to your network.

6Connect the AC power cord from the FastStream to the proper AC source outlet.

CAUTION

The power source must be connected to a protective earth ground and comply with local electrical codes. Improper grounding may result in an electrical shock or damage to the unit.

If you are installing into a rack:

•Properly ground the FastStream to the rack equipment. The earth ground connection must be maintained.

•The power requirements plus the power draw of the other equipment in the rack must

not overload the supply circuit and/or wiring of the rack.

7Use the power switch to turn on power to the FastStream.

8Wait up to two minutes for the FastStream Ready LED to light indicating the FastStream has completed its power-on self test sequence.

9Continue to Discovering the IP address .

Discovering the IP address

Note

The FastStream is initially configured with DHCP enabled. It is best if you have access to a DHCP server.

1Work from the computer attached to the FastStream Ethernet port. From the CD supplied with your FastStream, run the QuickNav Utility QuickNAV-windows.exefor Windows or QuickNAV-Macfor Mac OS X.

2Locate the FastStream with the serial number recorded earlier.

3Highlight the serial number.

4Click Next.

If a DHCP server is available on your network, an address is assigned automatically by the server. Note the assigned address:

_____________________________________

If you do not have a DHCP server, get an IP address and subnet mask from your network administrator, type it into the area provided, and click on Next.

5Click on Launch Browser.

Your browser points to the ATTO ExpressNAV splash screen. If you use Internet Explorer as a browser, continue on to the optional Setting up Internet Explorer below. If not, continue on to Beginning initial configuration .

Setting up Internet Explorer

1 Open your browser.

9

ATTO Technology Inc. FastStream SC Installation and Operation Manual

Page 13 Page 15
Image 14
Page 13 Page 15
Contents FastStream SC Atto Technology, Inc Contents Phone Home Email Alerts Drive Diagnostics Configure Storage into RAID GroupsMonitor Storage, Configurations Scsi Enclosure Services SESInterface Options Manage Atto Devices, ConfigurationsAppendix E Warranty Xxvi Appendix B Design RAID Groups XixAudio/video features FastStream 5000 Series featuresRAID protection features Additional FastStream 5300 featuresAdditional FastStream 5500 features Additional FastStream 5700 featuresFastStream SC 5300 Physical Attributes Exhibit 1.1-1 The connector side of the FastStream SC5300 FastStream SC 5500 Physical Attributes Reset/restore factory default switchOperating Temperature 5 C-40 C SAS/SATA portsLEDs on the faceplate are Do not block the enclosure’s vents. FastStream SC 5700 Physical AttributesCooling and airflow Fibre Channel ports Page Installing the FastStream Install the FastStream Storage ControllerUnpacking the packing box verifying contents Setting up Internet ExplorerUncheck the Require server verification check box Beginning initial configurationSelect Internet Options Select Initialize and Verify Drives Ensure Drive IntegrityBefore creating RAID groups After creating RAID groups Auto-Rebuild Configure Storage into RAID GroupsFeatures you may choose Initialization Fault ToleranceSelecting an application Preliminary stepsGeneral Digital Video, General IT or Database Quick Digital VideoAudio Click CommitCreating a custom setup Page Page Modify System Values Changing current user name, passwordCreating a read-only user name, password Changing system variablesWhen you have completed your changes, click on Commit Health and Status Monitor page appears Monitor Storage, ConfigurationsHealth and Status Monitor Configuration Display Scsi Enclosure Services SESPhone Home Email Alerts Click the Set up Error Notification buttonConfiguration Exhibit 6.1-1 The Error Notification Click the Read-Only Drive Test button Drive DiagnosticsRead only drive test Click on Identify Drive Drive performance and healthIdentifying a drive attached to the FastStream Scsi Enclosure Services SES Setting up SESIdentifying SES elements Monitoring SES elements Use the Health and Status MonitorSelect the Monitor Enclosure Services button Use the Manage menuCreating RAID groups Modify StorageRAID group processes Deleting RAID groupsAdding drives to a RAID group Adding mirrors to a RAID configurationChanging RAID configuration RAID migration Rebuilding RAID groups Modifying RAID group mappingModifying RAID group partitions Click on the Modify RAID Group Mapping buttonSelect the Add/Remove Hot Spares button FastStream process adding or removing Hot SparesModifying RAID options Removing RAID configuration data Advanced CLIPage Discovering, managing other Atto devices Manage Atto Devices, ConfigurationsCreating a unique name for your FastStream Appliance NameSaving or restoring a configuration Click on the System Configuration Save/Restore buttonUsing the ExpressNAV Storage Manager Interface OptionsType FastStream in the New Connection dialog box Using the serial portUsing Telnet EnterUpdate Firmware Click UploadPage Symbol/Abbreviation Indicates Appendix a CLI Provides an ASCII-based InterfaceCLI error messages CLI summaryCommand Default Example IiiIpdhcp Command Default Example AutoResume CLI command explanationsAutoMap DefaultInterleave BlockDevCleanBoot Delay BlockDevIdentifyEmailPassword DriveTestConfigDumpConfiguration DriveTestEventLog FCPortErrorsEthernetSpeed EventLogFilterFCTargets FCPortListFCSCSIBusyStatus FCWWNameMaxOpTemp IPSubnetMaskIsReserved MetricsResetFCPortErrors PasswordReadOnlyPassword RestoreConfigurationRGCommit RGCancelAddStorageRGAutoRebuild RGCreateRGRebuild RGWaitTimeoutRGPreFetch RGResumeConversionRoute SaveConfigurationRMStatus RouteDisplaySerialPortBaudRate SCSIPortResetSCSIPortResetOnStartup SerialPortEchoSESEnclosures SESDiskFailureAlarmDefault disabled SESIdentifyTime TemperatureTailEventLog TimeZoneDvraid Digital Video RAID Appendix B Design RAID GroupsJbod Just a Bunch of Disks RAID Level 1 plus additional mirroring RAID Level 0 striping, no redundancyRAID Level 1 mirroring duplicate drives RAID Level 5 striping, parity distributed among drives RAID Level 1+0 striping, mirror spans two drivesRAID Level 4 striping, one parity drive Disk Stripe Data Cable types Connecting Scsi devices to Scsi portsAppendix C Scsi Cabling Support Max Bits EndedAppendix D Standards and Compliances Declaration of ConformityAppendix E Warranty Manufacturer limited warranty
Top Page Image Contents