ATTO Technology SC 5700 operation manual When you have completed your changes, click on Commit

6Make any changes.

•Appliance name: The appliance name is a unique 8-character identifier which is displayed at the top of each screen. You may find this useful if you are managing multiple ATTO devices from a single workstation. Refer to Manage ATTO Devices, Configurations on page 37.

•Time and date: use a remote time server to set the time and time zone, or manually set the time and date. Refer to Date, Time, TimeZone and SNTP in Appendix A, CLI Provides an ASCII-based Interface.

•Fibre Channel: change the data rate or the connection mode for each FC port. Refer to FCDataRate and FCConnMode in Appendix A.

•Assign a hard address. Refer to FC Hard and FCHardAddress in Appendix A.

•Establish Access through FC Ports: change whether all drives are available to both ports, creating one node name for both ports, or if different node names are to be created for each port.

•Ethernet management port: change whether or not you use DHCP for an IP address, subnet mask and gateway, or manually change these parameters and set a DNS server address. Refer to IPDHCP in Appendix A.

7When you have completed your changes, click on Commit.

20