ATTO Technology SC 5700 Quick Digital Video, Audio, General Digital Video, General IT or Database

Page 20

Quick Digital Video

1After choosing Quick Digital Video, the Setup Wizard page appears.

Select your operating system.

2If you chose Windows, click Yes, the system restarts. After the restart completes, continue to Step 3.

If you chose Mac, continue on to Step 3.

3If all your drives do not appear in the Find Drives box, click on System Scan.

For the FastStream 5300, this setup requires exactly 6, 12 or 24 drives appear as available on the screen after the scan.

For the FastStream 5700, this setup requires exactly 6, 7, 8, 12, 14, 16 or 24 drives to appear as available on the screen after the scan. Physically add or disconnect drives as needed and rescan.

4Click Next.

5Choose an Initialization method (refer to Initialization on page 14).

6Choose an Auto-Rebuildoption (refer to Auto- Rebuild on page 13).

7Select a Fault Tolerance (refer to Fault Tolerance on page 14).

8Click Commit.

9A warning box appears.

If you want to continue click Yes. The configuration completes and the Health and Status Monitor page appears.

If you wish to start over, click No.The Setup Wizard page appears.

Audio

1After choosing Audio, the Audio Setup Wizard page appears.

Choose to use the same or a different node name for each host Fibre Channel port.

•If you know if all drives are to be available to all Fibre Channel ports or not, select Yes or No. If you do not know, select Not Sure.

•If you select Not Sure, you are asked a series of questions to determine the correct configuration for your needs and setup.

•Several definitions are listed in a grey box at the bottom of the Audio Setup Wizard screen which may help you determine answers to the setup questions.

2 Click on Next.

Note

Depending on your choice and your current system, the appliance may need to restart.

3If all your drives do not appear in the Find Drives box, click on System Scan.

This setup requires 4, 6, 8 or 12 drives.

Add or disconnect drives as needed to ensure you have 4, 6, 8 or 12 drives appearing on the screen after the scan.

4Click Next.

5Choose an Initialization method (refer to Initialization on page 14).

6Choose an Auto-Rebuildoption (refer to Auto- Rebuild on page 13).

7Select the number of users for this appliance.

8Depending on the number of users and the number of drives you have in your system, you may be asked to choose a Fault Tolerance (refer to Fault Tolerance on page 14).

9Click Commit.

10A warning box appears.

If you want to continue click Yes. The configuration completes and the Health and Status Monitor page appears.

If you wish to start over, click No.The Setup Wizard page appears.

General Digital Video, General IT or Database

1After choosing General Digital Video, General IT or Database, the Setup Wizard page appears.

Choose an Initialization method (refer to Initialization on page 14).

2Choose an Auto-Rebuildoption (refer to Auto- Rebuild on page 13).

3If all your drives do not appear in the Find Drives box, click on System Scan.

4Click on Commit.

5A warning box appears.

If you want to continue click Yes. The configuration completes and the Health and Status Monitor page appears.

If you wish to start over, click No.The Setup Wizard page appears.

15

ATTO Technology Inc. FastStream SC Installation and Operation Manual

Page 19 Page 21
Image 20
Page 19 Page 21
Contents FastStream SC Atto Technology, Inc Contents Configure Storage into RAID Groups Monitor Storage, ConfigurationsPhone Home Email Alerts Drive Diagnostics Scsi Enclosure Services SESManage Atto Devices, Configurations Appendix E Warranty XxviInterface Options Appendix B Design RAID Groups XixFastStream 5000 Series features RAID protection featuresAudio/video features Additional FastStream 5300 featuresAdditional FastStream 5500 features Additional FastStream 5700 featuresFastStream SC 5300 Physical Attributes Exhibit 1.1-1 The connector side of the FastStream SC5300 Reset/restore factory default switch Operating Temperature 5 C-40 CFastStream SC 5500 Physical Attributes SAS/SATA portsLEDs on the faceplate are Do not block the enclosure’s vents. FastStream SC 5700 Physical AttributesCooling and airflow Fibre Channel ports Page Install the FastStream Storage Controller Unpacking the packing box verifying contentsInstalling the FastStream Setting up Internet ExplorerUncheck the Require server verification check box Beginning initial configurationSelect Internet Options Select Initialize and Verify Drives Ensure Drive IntegrityBefore creating RAID groups After creating RAID groups Auto-Rebuild Configure Storage into RAID GroupsFeatures you may choose Fault Tolerance Selecting an applicationInitialization Preliminary stepsQuick Digital Video AudioGeneral Digital Video, General IT or Database Click CommitCreating a custom setup Page Page Changing current user name, password Creating a read-only user name, passwordModify System Values Changing system variablesWhen you have completed your changes, click on Commit Health and Status Monitor page appears Monitor Storage, ConfigurationsHealth and Status Monitor Configuration Display Scsi Enclosure Services SESPhone Home Email Alerts Click the Set up Error Notification buttonConfiguration Exhibit 6.1-1 The Error Notification Click the Read-Only Drive Test button Drive DiagnosticsRead only drive test Click on Identify Drive Drive performance and healthIdentifying a drive attached to the FastStream Scsi Enclosure Services SES Setting up SESIdentifying SES elements Monitoring SES elements Use the Health and Status MonitorSelect the Monitor Enclosure Services button Use the Manage menuModify Storage RAID group processesCreating RAID groups Deleting RAID groupsAdding drives to a RAID group Adding mirrors to a RAID configurationChanging RAID configuration RAID migration Modifying RAID group mapping Modifying RAID group partitionsRebuilding RAID groups Click on the Modify RAID Group Mapping buttonSelect the Add/Remove Hot Spares button FastStream process adding or removing Hot SparesModifying RAID options Removing RAID configuration data Advanced CLIPage Manage Atto Devices, Configurations Creating a unique name for your FastStreamDiscovering, managing other Atto devices Appliance NameSaving or restoring a configuration Click on the System Configuration Save/Restore buttonUsing the ExpressNAV Storage Manager Interface OptionsUsing the serial port Using TelnetType FastStream in the New Connection dialog box EnterUpdate Firmware Click UploadPage Symbol/Abbreviation Indicates Appendix a CLI Provides an ASCII-based InterfaceCLI error messages CLI summaryCommand Default Example IiiIpdhcp Command Default Example AutoResume CLI command explanationsAutoMap BlockDevClean Boot DelayDefaultInterleave BlockDevIdentifyDriveTestConfig DumpConfigurationEmailPassword DriveTestFCPortErrors EthernetSpeedEventLog EventLogFilterFCPortList FCSCSIBusyStatusFCTargets FCWWNameIPSubnetMask IsReservedMaxOpTemp MetricsPassword ReadOnlyPasswordResetFCPortErrors RestoreConfigurationRGCancelAddStorage RGAutoRebuildRGCommit RGCreateRGWaitTimeout RGPreFetchRGRebuild RGResumeConversionSaveConfiguration RMStatusRoute RouteDisplaySCSIPortReset SCSIPortResetOnStartupSerialPortBaudRate SerialPortEchoSESDiskFailureAlarm Default disabledSESEnclosures SESIdentifyTemperature TailEventLogTime TimeZoneDvraid Digital Video RAID Appendix B Design RAID GroupsJbod Just a Bunch of Disks RAID Level 1 plus additional mirroring RAID Level 0 striping, no redundancyRAID Level 1 mirroring duplicate drives RAID Level 5 striping, parity distributed among drives RAID Level 1+0 striping, mirror spans two drivesRAID Level 4 striping, one parity drive Disk Stripe Data Cable types Connecting Scsi devices to Scsi portsAppendix C Scsi Cabling Support Max Bits EndedAppendix D Standards and Compliances Declaration of ConformityAppendix E Warranty Manufacturer limited warranty
Top Page Image Contents