ATTO Technology SC 5700 operation manual CLI error messages, CLI summary

Symbol/Abbreviation	Indicates
GroupName	The name of the RAID group, designated by the user, to which a block
	device is assigned. Use RGDisplay to discover RAID group names
MemberIndex	Index designation of a RAID group member as found by using the
	RMStatus command
mp1	Ethernet port used to manage the FastStream
PartitionIndex	Index designation of a partition as found by using the PartitionDisplay
	command

CLI error messages

The following error messages may be returned by the Command line Interface:

ERROR. Invalid Command. Type 'Help' for command list.

ERROR. Wrong/Missing Parameters

Usage: <usage string>

ERROR Invalid RAID Group state

ERROR Invalid Block Device index

ERROR Invalid RAID MemberIdx

ERROR Maximum number of RAID Groups exceeded

ERROR Insufficient number of RAID Group members

ERROR

Block Device at specified index no longer available

ERROR Insufficient RAID Group members for RAID type

CLI summary

The following chart summarizes the Command Line Interface commands, their defaults, and an example of how to enter the commands. Commands which have no default values have a blank entry in that column of the table.

CAUTION

Do not use CLI unless you are directed to by an ATTO technician.

Changing parameters may cause loss of data and/or disruption to performance and reliability of the FastStream.

The ExpressNAV Storage Manager is the preferred method to operate and manage the FastStream. Refer to Interface Options on page 39 for details.

Command	Default	Example
AutoMap		automap
AutoResume	initialization = enabled	set autoresume all disabled
	rebuild = enabled
	erase = disabled
BlockDevClean		blockdevclean 30
BlockDevIdentify		blockdevidentify 30
BlockDevIDStop		blockdevidstop
BlockDevScan		blockdevscan
BootDelay	5	set bootdelay 25

ii