ATTO Technology SC 5700 Modify System Values, Changing current user name, password

5.0 Modify System Values

Default values are appropriate for most configurations, but may be modified for your needs using ATTO ExpressNAV Storage Manager.

It is best practice to change the default user name and password to a user name and password important to you. Other configurations may also be changed,

however, use extreme caution when changing default values.

Changing current user name, password

It is best practice to change the user name and password or all Telnet, FTP and ATTO ExpressNAV Storage Manager sessions. Refer to the CLI commands Username and Password on page xii in Appendix

1Open a Command Line Interface session either using Telnet or the serial port as shown in Interface Options on page 39.

2Type set UserName [name].

3Press Enter.

4Type set Password.

5Press Enter.

6Follow the instructions on the screen to confirm your old and new password.

Note

The user name is case insensitive and password is case sensitive.

The user name and password for all Telnet, FTP and ATTO ExpressNAV Storage Manager sessions is changed.

Creating a read-only user name, password

You may wish to set up a read-only user name and password to prevent changes to storage and FastStream settings. Refer to the CLI commands ReadOnlyPassword and ReadOnlyUsername on page xii in Appendix

1Open a Command Line Interface session either using Telnet or the serial port as shown in Interface Options on page 39.

2Type set ReadOnlyUsername [name].

3Press Enter.

4Type set ReadOnlyPassword.

5Press Enter.

6Follow the instructions on the screen to confirm the read-only password.

The read-only user name and read-only password for all user interface sessions are changed.

Changing system variables

You may change several system configurations to suit	3 Click on the FastStream arrow.
your needs.

1If you are not already in the ExpressNAV Storage Manager, type the IP address of your appliance in a standard browser. On the splash screen, click Enter Here. In the box provided, type in your user name and password, and click OK.

2Click on the Manage menu item on the left had side of the page.

4 Click on the System Configuration radio button.

5 Click on Next.

19

ATTO Technology Inc. FastStream SC Installation and Operation Manual