Tripp Lite B064-016-02-IPG, B064-032-04-IPG owner manual Download, System Operation, Reset on Exit

OSD Operation (continued)

Maintenance (continued)

System Operation

The System Operation sub-section allows you to clear port names, and reset the KVM configuration settings to their default values.

The functions available in the System Operation page are explained in the table below.

Field	Example
Clear Port Names	Click this button to clear all of the port names on the installation and restore them to their default values. Upon clicking this
	button, you will be prompted to confirm that you wish to clear all port names. Click Yes to proceed.
Reset Default Values	Click this button to undo all configuration changes that have been made to the KVM, and restore them to the factory default
	settings. This does not affect port names, account information or network information. Upon clicking this button, you will be
	prompted to confirm that you wish to proceed. Click Yes to proceed.
Reset on Exit	Check this box and click the Apply button to have the KVM switch reset itself and implement all new settings upon logging out.
	(Following the reset, allow approximately 30 to 60 seconds before logging back into the KVM.)
	If you change the IP address of the KVM, the Reset on Exit checkbox is automatically checked. To prevent the KVM from
	resetting and saving the new IP address, uncheck this box. Note: Un-selecting this checkbox will only cause the new network
	settings to be ignored for one logout. When you log back in, the changes you made still appear in the Network settings fields,
	and the Reset on Exit checkbox is once again checked. To ensure that these settings don’t get changed to something you
	don’t want, always make sure that you leave the Network settings page with the correct information entered in.

Download

The Download icon is used to download non-browser AP versions of the Windows and Java Clients, as well as the Log Server. Selecting this tab will open a drop-down list of the programs that are available for download.

Note: If you have not been given access to one of these applications, you will not be able to download it.

Click on the Download icon and select the program you want to download. Save it to a convenient location on your hard disk and run it from there.

55